Products
Tower combination
The most important information
| Age group ? | 4+ |
|---|---|
| Areas of application ? | supervised playgrounds |
| Number of users ? | 30 persons |
| Activities ? | - |
Technical data
| Device length ? | 13,23 m |
|---|---|
| Device width ? | 4,83 m |
| Device height ? | 8,33 m |
| Free fall height ? | 2,00 m |
| Platform heights | - |
| Total weight ? | 3754.00 kg |
| Heaviest single item ? | 1610.00 kg |
| Minimum room length ? | 17,57 m |
| Minimum room width ? | 8,16 m |
| Minimum room height ? | 8,33 m |
Assembly & Foundations
| Assembly time ? | 16,0 h |
|---|---|
| Number of fitters ? | 3 persons |
| Lifting gear required | Yes |
| Foundations | 030x030x040 |
Product Downloads
Product description
Support post
Standing posts made of robinia plywood, cylindrically milled, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable stainless steel post caps.
Stainless steel tubular base for the foundation and elevation of Robinia roundwood posts, Ø 120 mm, below the play level.
Platform floor
Platform floor made of boards, 30 mm thick and circumferential squared timber beams 45 x 100 mm. The dried sawn timber made of robinia is planed, bevelled and free of rotting knots. Force-fit floor fastening using special stainless steel brackets with a continuous bolt connection.
The trapezoidal platform for the roller conveyor connection is equipped with a 6 mm thick, folded reinforcement bracket for fastening the single-seat flange.
Attachments
- Railing bracket, anti-roll, made of stainless steel tube, Ø 33.7 x 2 mm
- Tandem railing made of stainless steel tube, Ø 33.7 x 2 mm
- Vertical handle as climbing aid made of stainless steel tube, Ø 33.7 x 2 mm
- Wooden balustrade made of robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33.7 x 2 mm, from 1.50 m height with additional crossbar, 30 mm
- Lattice balustrade made of stainless steel tube, Ø 33.7 x 2 / 25 x 2 mm, one-piece welded construction
- Stainless steel balustrade, 4 mm, for roller conveyor, with shed roof made of highly weather-resistant coloured HPL laminate, 13 mm, fastened between stainless steel tubes Ø 38 x 2.5 mm
- Climbing wall made of highly weather-resistant coloured HPL laminate with free climbing elements attached on one side, 20 mm, frame made of stainless steel tubes Ø 33.7 x 2 mm
- Rung (cranked) made of stainless steel tube, Ø 33.7 mm
- Vertical climbing pole made of stainless steel tube, Ø 38 mm
- Climbing wall made of robinia wood with attached climbing elements made of HPL laminate panels, 20 mm
- Bench 0.80 m made of highly weather-resistant coloured HPL laminate, 20 mm, on stainless steel tube, Ø 33.7 x 2 mm
- Roller conveyor with connection for support posts, welded in one piece, sheet thickness: 2.5 mm, gripper opening on both sides in the single-seat section, polyacrylic light openings on both sides, with internal stainless steel track guide, stainless steel rollers on roller bearings, Ø 50 mm,
- Support post made of stainless steel tube Ø 120 x 3 mm with plug-in base
- Depth anchoring for the roller conveyor outlet made of stainless steel tube Ø 48.3 x 2.6 mm with flat steel struts, 8 mm
- Climb-over protection made of highly weather-resistant HPL laminate, attached to clamping clip, installation on site
- Tower roof, pitch 72°, made of highly weather-resistant HPL laminate, 13 mm, with wind chimes
For your planning, please note that stainless steel slides and roller tracks should be orientated to the north-east or in the partial shade of trees due to the possible heating of the slide surface.
Metal components: Stainless steel
The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking.
The modular add-on parts transfer their forces directly to the uprights via a special adapter fastening. The screw connections are secured against unauthorised loosening.
Item number: 025320700
This Kaiser & Kühne product enables:
