• Download all files
• Data Sheet
• Maintenance Instructions
• Technical drawing
• Technical drawing (2D DWG)

Technical data
Floor area: 13.55 x 17.20 m
Minimum space: 16.70 x 19.80 m (179 m²)
Total height: 8.05 m
Platform height: 0.60 to 4.00 m
Seat height: 4.10 m
Weight: 880 kg heaviest individual part
6800 kg in total

Support post
Posts made of stainless steel tube Ø 120 mm covered with non-detachable stainless steel post caps. Connection of the modular add-on parts to the uprights using solid and fully welded stainless steel weld-in sleeves without protruding connecting elements.

Platform floor
Platform floor made of boards, 30 mm thick and circumferential squared timber beams 45 x 100 mm. The dried sawn timber made of robinia is planed, bevelled and free of rotting knots. Force-fit floor fastening using special stainless steel brackets with a continuous bolt connection.

Attachments
- Wooden balustrade made of robinia, 120 x 30 mm. Fastening between stainless steel tubes Ø 33.7 x 2 mm
- Lattice balustrade made of stainless steel tube, Ø 33.7 x 2 / 25 x 2 mm, one-piece welded construction
- Step railing made of stainless steel tube, Ø 33.7 x 2 mm, for stepped platform floors
- Railing bracket, anti-roll, made of stainless steel tube, Ø 33.7 x 2 mm
- Climbing rung made of stainless steel tube, Ø 38 mm, torsion-resistant
- Suspension bridge made of 45 x 100 mm timbers with 30 mm hard rubber spacer blocks, stainless steel suspension cables Ø 10 mm with 4 tensioning devices, fine-linked stainless steel railing chains
- Footbridge: V-shaped net construction made of Hercules rope, walkway made of wooden rungs with approx. 40 mm clear rung spacing, attached to steel frame construction, parapet height approx. 0.75 m
- Net tunnel: Tunnel-shaped net construction made of Hercules rope, mesh size approx. 125 x 125 mm (running surface) or approx. 260 x 260 mm (side and roof surface), attached to stainless steel frame
- Tower roof, pitch 72°, made of highly weather-resistant HPL laminate (royal blue), 13 mm, with rotating flag
- Trapezoidal monopitch roof, made of highly weather-resistant HPL laminate (royal blue), 13 mm, attached to roof frame made of stainless steel tube Ø 33.7 x 2 mm

Tunnel spiral slide
Mounting height: 4.00 m
Seat height: 4.10 m
Slide inclination: 30°/38°
Turning (right): 280°
Tunnel diameter: 0.80 m
Sliding plate thickness: 2.5 mm
Course: Turn 208° right

Slide segments made of stainless steel, particularly quiet due to the tunnel shape, welded together to form a three-part slide coiled around a centre pylon for transport reasons, including corresponding connecting flanges to facilitate assembly on site.

Tunnel landslide
Mounting height: 4.00 m
Seat height: 4.10 m
Slide inclination: 30°
Sliding plate thickness: 2.5 mm
Slide width: 0.60/0.80 m
Course: Curve 35° left

Slide segments made of stainless steel, particularly low-noise thanks to the tunnel or trough shape, welded to form a two-part slide for transport reasons, including corresponding connecting flanges to facilitate assembly on site.
Incl. support post for the curve area, stainless steel upright Ø 120 mm, stainless steel mounting flange.

Metal components: Stainless steel. The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking.
The modular add-on parts transmit their forces via a
special adapter fastening directly into the uprights. The screw connections are secured against unauthorised loosening.

For your planning, please note that stainless steel slides should be orientated to the north-east or in the partial shade of trees due to the possible heating of the slide surface.

Foundations (client-provided)
61 units 0.40 x 0.40 x 0.40 m
1 piece 0.60 x 0.60 x 0.60 m
5 pcs. 0.60 x 1.00 x 0.50 m
1 piece 0.80 x 0.80 x 1.00 m
3 pcs. 1.00 x 0.40 x 0.40 m
1 piece 1.40 x 0.75 x 0.40 m
Concrete volume: 6.74 m³

Statics, test statics and planning permission:
If a separate structural analysis, test statics or a building permit is required for the installation of the appliance, please let us know in good time before placing the order so that we can provide the necessary documents in good time before installation.
The documents shall be prepared by a recognised engineering firm. The resulting costs are to be borne by the client.

Assembly time
4 fitters 40 hours each, plus lifting gear
(without foundation)

Free fall height
2,00 m

Suitable for
Children aged 4 and over,
public playgrounds etc.,
Physical activities

Item number: 025200500