Products
Water play structure
The most important information
| Age group ? | 2+ |
|---|---|
| Areas of application ? | Public playgrounds |
| Number of users ? | 21 persons |
| Activities ? | Manual activity |
Technical data
| Device length ? | 5,60 m |
|---|---|
| Device width ? | 3,65 m |
| Device height ? | 1,65 m |
| Free fall height ? | 0,80 m |
| Platform heights | - |
| Total weight ? | 455.00 kg |
| Heaviest single item ? | 85.00 kg |
| Minimum room length ? | 8,60 m |
| Minimum room width ? | 6,65 m |
| Minimum room height ? | 1,65 m |
Assembly & Foundations
| Assembly time ? | 2,0 h |
|---|---|
| Number of fitters ? | 2 persons |
| Lifting gear required | - |
| Foundations | 040x040x040 |
Product Downloads
Product description
Technical data
Floor area: 3.65 x 5.60 m
Minimum space: 6.65 x 8.60 m (43 m²)
Total height: 1.65 m
Platform height: 0.60/0.75 m
Weight: 85 kg heaviest individual part
455 kg in total
Support post
Standing posts made of robinia plywood, cylindrically milled, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable stainless steel post caps.
Stainless steel tubular base for the foundation and elevation of Robinia roundwood posts, Ø 120 mm, below the play level.
Platform floor
Platform floor made of boards, 30 mm thick and circumferential squared timber beams 45 x 100 mm. The dried sawn timber made of robinia is planed, bevelled and free of rotting knots. Force-fit floor fastening using special stainless steel brackets with a continuous bolt connection.
Attachments
- Railing bracket to prevent rolling, made of stainless steel tube, Ø 33.7 x 2 mm
- Step railing made of stainless steel tube, Ø 33.7 x 2 mm
- Wooden balustrade made of robinia, 125 x 30 mm, fastened between stainless steel tubes Ø 33.7 x 2 mm
Water pump article no. 0-33130-001
Suction pipe connection 1 ¼ inch (pipe diameter min. ¾ inch), welded stainless steel construction, encapsulated pump housing, pump mechanism with roller and plain bearings, upper pump housing with swivel must be removed, e.g. during the frost period, sealing cover („winterisation plate“) for the remaining lower part of the pump is supplied. With screwed-on flange pipe for setting in concrete.
Please note:
When connecting the water pump to a pressurised water line, the K&K valve combination (item no. 0-33190-000 or 0-33195-000) is required.
If the water supply is intentionally interrupted temporarily (timer or similar), a negative pressure builds up in the pipe system when the pump is operated again, which causes the pump swivel to kick back.
It is therefore essential to prevent the pump swivel arm from being actuated (e.g. by using the pump lock, part number 1040639).
Please also observe the framework data specified in the installation instructions (spacing, diameter of the cables, etc.); these are available on request from K&K or directly as a PDF from our website at www.kaiser-kuehne.com.
Flange pipe article no. 1040065
Flange pipe for screwing onto K&K water pump.
For setting in concrete below the play level.
Solitary bottom basin (without screw pump)
Welded stainless steel construction with mounting device for the base bearing of the water spiral. Water inlet directly below or above the pipe ring. Sheet thickness min. 2 mm / pipe Ø 38 mm.
Matching ring foundation (15168) for anchoring to the flange ring and moulded stones (15169) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.
Water spiral
Spiral length: approx. 1.50 m
Outer diameter: 0.25 m
Welded stainless steel construction with roller bearings, foot and head bearings, for connection to posts.
Collecting basin with water stopper
Welded stainless steel construction for water absorption with two water drainage openings. Sheet thickness: min. 2 mm / tube Ø 38 mm, for connection to posts.
Water channel 1.60 m, 2 pieces
Welded stainless steel construction 0.80 x 1.60 m, sheet thickness: min. 2 mm / pipe Ø 38 mm. With connection to support posts and additional elevation with stepless inclination for installation to provide the required gradient for the water inlet and outlet. Sloped outlet. Including storage flap, freely positionable, stainless steel handle, rubber blade with fabric insert.
Water table (0.25) Article no. 0-33445-000
Base area: 0.84 x 1.84 m
Total height: 0.40 m
Welded stainless steel construction with 1 water drain pipe. Rubber cone closure with locking mechanism for complete water drainage. 4 shelves. Sheet thickness: min. 2 mm / pipe Ø 38 mm. Anchored to the flange ring.
Matching ring foundations (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundations in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.
Water bowl (0.25) Article no. 0-33430-000
Base area: 0.84 x 1.00 m
Total height: 0.40 m
Welded stainless steel construction with 1 water drainage opening. Sheet thickness: min. 2 mm/pipe Ø 38 mm.
Matching ring foundation (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.
Metal components: Stainless steel.
The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment also reduces cracking. The modular add-on parts transfer their forces directly to the uprights via a special adapter fastening. The screw connections are secured against unauthorised loosening by cover caps.
Foundations (client-provided)
6 pcs. 0.40 x 0.40 x 0.40 m
3 pcs. 0.50 x 0.50 x 0.50 m
Concrete volume: 0.8 m³
Assembly time
2 fitters 2 hours each.
(without foundation, without water connection)
Free fall height
0,80 m
Suitable for
Children aged 4 and over,
public playgrounds etc.,
Manual activities
Item number: 034354701
This Kaiser & Kühne product enables:
