• Download all files
• Data Sheet
• Certificate
• Installation Instructions
• Maintenance Instructions
• Technical drawing
• Technical drawing (2D DWG)
• Technical drawing (3D DWG)

Technical data
Floor area: 4.35 x 7.07 m
Minimum space: 7.35 x 10.07 m (52 m²)
Total height: 2.00 m
Platform height: 0.20/0.95 m
Weight: 55 kg heaviest individual part
626 kg in total

Support post
Standing posts made of robinia plywood, cylindrically milled, Ø 120 mm. Unprotected end grain surfaces are covered with non-detachable stainless steel post caps.
Stainless steel tubular base for the foundation and elevation of Robinia roundwood posts, Ø 120 mm, below the play level.
Posts that are flush with the platform are covered with welded-on stainless steel discs.

Platform floor
Platform floor made of boards, 30 mm thick and circumferential squared timber beams 45 x 100 mm. The dried sawn timber made of robinia is planed, bevelled and free of rotting knots. Force-fit floor fastening using special stainless steel brackets with a continuous bolt connection. Pump platform with profiled stainless steel sheet.

Attachments
- Railing bracket to prevent rolling, made of stainless steel tube, Ø 33.7 x 2 mm
- Tandem railing made of stainless steel tube, Ø 33.7 x 2 mm
- Wooden balustrade made of robinia, 125 x 30 mm, fastened between stainless steel tubes Ø 33.7 x 2 mm
- Climbing rung (cranked) made of stainless steel tube, Ø 33.7 x 2 mm
- Vertical handle as climbing aid made of stainless steel tube, Ø 33.7 x 2 mm

Water pump article no. 0-33130-001
Suction pipe connection 1 ¼ inch (pipe diameter min. ¾ inch), welded stainless steel construction, encapsulated pump housing, pump mechanism with roller and plain bearings, upper pump housing with swivel must be removed during the frost period, sealing cover („winterisation plate“) for the remaining lower part of the pump is supplied.

Please note:
When connecting the water pump to a pressurised water line, the K&K valve combination (item no. 0-33190-000 or 0-33195-000) is required.
If the water supply is intentionally interrupted temporarily (timer or similar), a vacuum will build up in the pipework system if the pump is operated again, which will cause the pump swivel to kick back. It is therefore essential to prevent the pump swivel arm from being actuated (e.g. by using the pump lock part number 1040639).
Please also observe the framework data specified in the installation instructions (spacing, diameter of the cables, etc.); these are available on request from K&K or directly as a PDF from our website at www.kaiser-kuehne.com.

Y-channel
Y-shaped water channel with one inlet area and two outlets, sheet thickness: min. 2 mm / pipe Ø 38 mm

Water wheel Ø 0.60 m
Water wheel consisting of 12 blades, folded flat at the front and enclosed by side walls. Wheel bearing with roller bearings, sheet thickness 2.5 mm, with support, tube Ø 38 mm, prepared to accommodate the water channel.

Water channel 1.60 m, 3 pieces
Welded stainless steel construction. Sheet thickness: min. 2 mm / pipe Ø 38 mm. Bevelled spout.
Stepless inclination for installation for the required gradient for the water inlet and outlet through additional elevation.

Stowage flap, 5 pieces
Storage flap for K&K water channels, freely positionable, stainless steel handle, rubber blade with fabric insert

Solitary bottom basin (without screw pump)
Welded stainless steel construction with mounting device for the base bearing of the water spiral. Water inlet directly below or above the pipe ring. Sheet thickness min. 2 mm / pipe Ø 38 mm.
Matching ring foundation (15168) for anchoring to the flange ring and moulded stones (15169) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Water spiral (2.00) with handwheel drive
Length: 2.00 m
Outer diameter: 0.25 m
Handwheel Ø: 0.80 m
Welded stainless steel construction with roller bearings, screw-on foot bearing, connection to posts.

Modular catch basin
Welded stainless steel construction for water absorption, with water drain pipe. Sheet thickness min. 2 mm / tube Ø 38 mm. For connection to posts.

Water bowl (0.50) Article no. 0-33431-000
Base area: 0.84 x 1.00 m
Total height: 0.62 m
Weight: 55 kg in total
Welded stainless steel construction with 1 water drainage opening. Sheet thickness: min. 2 mm/pipe Ø 38 mm. Anchored to the flange ring.
Matching ring foundation (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Water table (0.25) Article no. 0-33440-000
Total height: 0.40 m
Welded stainless steel construction with 1 water drain pipe. Rubber cone closure with locking mechanism for complete water drainage. 2 shelves. Sheet thickness: min. 2 mm / pipe Ø 38 mm. Anchored to the flange ring.
Matching ring foundation (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Metal components: Stainless steel.
The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment also reduces cracking. The modular add-on parts transfer their forces directly to the uprights via a special adapter fastening. The screw connections are secured against unauthorised loosening by cover caps.

Foundations (client-provided)
9 pcs. 0.40 x 0.40 x 0.40 m
7 units 0.50 x 0.50 x 0.50 m
1 piece 0.50 x 0.70 x 0.50 m
Concrete volume: 1.63 m³

Assembly time
2 fitters 8 hours each.
(without foundation, without water connection)

Free fall height
1,20 m

Suitable for
Children aged 3 and over,
public playgrounds etc.,
Manual activities

Item number: 034330700