• Download all files
• Data Sheet
• Certificate
• Installation Instructions
• Technical drawing
• Technical drawing (3D DWG)

Technical data
Floor area: 4.41 x 10.23 m
Minimum space: 7.44 x 13.08 m
Platform height: 1.40 to 2.40 m
Slide attachment height: 2.40 m
Seat height: 2.50 m
Slide mounting height above
Zero slide run-out: 3.90 m
(for hill height 1.50 m)
Slide inclination: 30°
Slide width: 0.60/0.80 m
Sliding plate thickness: 2.5 mm

Support post
Posts made of stainless steel tube Ø 120 mm, covered with non-detachable stainless steel post caps. Connection of the modular add-on parts to the uprights using solid and fully welded stainless steel weld-in sleeves without protruding connecting elements.

Platform floor
Platform floor made of boards, 30 mm thick and circumferential squared timber beams 45 x 100 mm. The dried sawn timber made of robinia is planed, bevelled and free of rotting knots. Force-fit floor fastening using special stainless steel brackets with a continuous bolt connection.

Attachments
- Railing bracket, anti-roll, made of stainless steel tube, Ø 33.7 x 2 mm
- Tandem railing made of stainless steel tube, Ø 33.7 x 2 mm
- Wooden balustrade made of robinia, 125 x 30 mm. Fastening between stainless steel tubes Ø 33.7 x 2 mm.
- Lattice balustrade made of stainless steel tube, Ø 33.7 x 2 / 25 x 2 mm, one-piece welded construction
- Climbing rung made of stainless steel tube, Ø 38 mm, torsion-resistant
- Vertical handle as climbing aid made of stainless steel tube, Ø 33.7 x 2 mm
- Tent roof, pitch 45°, made of highly weather-resistant HPL laminate, 13 mm, attached to roof frame made of stainless steel tube Ø 33.7 x 2 mm
- Trapezoidal monopitch roof, pitch 30°, made of highly weather-resistant HPL laminate, 13 mm. Attachment to roof frame made of stainless steel tube Ø 33.7 x 2 mm

Tunnel landslide
Slide segments made of stainless steel, particularly quiet due to the tunnel or trough shape, welded into a two-part slide for transport reasons, incl. flange connection at the separation point for easy assembly by bolting on site.
Course: 54° right-hand bend

For your planning, please note that stainless steel slides should be orientated to the north-east or in the partial shade of trees due to the possible heating of the slide surface.

Metal components: Stainless steel. The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking.
The modular add-on parts transfer their forces directly to the uprights via a special adapter fastening. The screw connections are secured against unauthorised loosening.

Foundations (client-provided)
9 pcs. 0.40 x 0.40 x 0.40 m
1 piece 0.40 x 0.40 x 0.60 m
1 piece 1.40 x 0.75 x 0.40 m

Free fall height
Platform: 1.40 m
Slide: Depending on the terrain, the free fall height and the extent of the impact area result from the vertical distance between the lower edge of the open slope slide area and the upper edge of the terrain.
The impact surface in the slip area must be fitted with a floor material that fulfils the requirements of Table 4 (see EN 1176-1). If a different material is to be used, its shock-absorbing properties must be verified by testing in accordance with EN 1177:2008. The floor surface surrounding the run-out section of the slide must fulfil the requirements for a critical fall height of at least 1000 mm (see EN 1176-3).

Suitable for
Children aged 5 and over,
public playgrounds etc.,
Physical activities

Item number: 041300500