• Download all files
• Data Sheet
• Certificate
• Technical drawing
• Technical drawing (2D DWG)

Technical data
Floor area: 2.40 x 3.35 m
Minimum space: 5.40 x 6.35 m (28 m²)
Total height: 1.60 m
Platform heights: 0.20/0.40 m

Support post
Posts made of stainless steel tube Ø 120 mm, covered with non-detachable stainless steel post caps. Connection of the modular add-on parts to the uprights using solid and fully welded stainless steel weld-in sleeves without protruding connecting elements.
The upright, which is flush with the platform, is covered with welded-on stainless steel discs.

Platform floors
Platform floor made of boards, 30 mm thick and circumferential squared timber beams 45 x 100 mm. The dried sawn timber made of robinia is planed, bevelled and free of rotting knots. Force-fit floor fastening using special stainless steel brackets with a continuous bolt connection.
Pump platform with additional profiled stainless steel plate.

Attachments
- Step railing 0.80 m x 0.15 m, made of stainless steel tube, Ø 33.7 x 2 mm
- Tube Ø 38 x 2.5 mm

Water pump article no. 0-33130-001
Suction pipe connection 1 ¼ inch (pipe diameter min. ¾ inch), welded stainless steel construction, encapsulated pump housing, pump mechanism with roller and plain bearings, upper pump housing with swivel must be removed, e.g. during the frost period, sealing cover („winterisation plate“) for the remaining lower part of the pump is supplied.

Please note:
When connecting the water pump to a pressurised water line, the K&K valve combination (item no. 0-33190-000 or 0-33195-000) is required.

If the water supply is intentionally interrupted temporarily (timer or similar), a negative pressure builds up in the pipe system when the pump is operated again, which causes the pump swivel to kick back.
It is therefore essential to prevent the pump swivel arm from being actuated (e.g. by using the pump lock, part number 1040639).

Please also observe the framework data specified in the installation instructions (spacing, diameter of the cables, etc.); these are available on request from K&K or directly as a PDF from our website at www.kaiser-kuehne.com.

Water storage basin
Base area: Ø 0.86 m
Welded stainless steel construction with a water drain pipe. Rubber cone closure with locking mechanism for complete water drainage. Sheet thickness: min. 2 mm/pipe Ø 38 mm.

Whirling table 0.80 m x 1.60 m
Welded stainless steel construction with 5 adjustable HPL prisms as flow obstacles. Sheet thickness: min. 2 mm, pipe Ø 33.7 mm or Ø 30 mm

Patio tray with 1 drain
Base area: Ø 0.90 m
Total height: 0.14 m
Welded stainless steel construction with water drainage opening. Sheet thickness: min. 2 mm / tube Ø 38 mm. Anchoring through post connection.

Metal components: Stainless steel.
The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking.

Foundations (client-provided)
11 units 0.40 x 0.40 x 0.40 m
Concrete volume: 0.70 m³

Assembly time
2 fitters 2 hours each.
(without foundation, without water connection)

Free fall height
0,73 m

Suitable for
Children aged 4 and over,
public playgrounds etc.,
Manual activities

Item number: 034070502