Cable Rides

Technical data
Area: 3,65 x 27,50 m
Minimum space: 5,70 x 29,25 m (125 m²)
Nominal cable length: 25,00 m
Height of the starting station: 3,90 m (above play level)
Height of the terminus: 2,90 m (above play level)
Weight: 165 kg heaviest single component
905 kg as a whole

– Cable ride crossbeams from hot-dip galvanised steel, powder coated and stove enamelled, colour on choice
– cable ride stanchions made from hot-dip galvanised steel, Ø 88,9 x 5,6 mm
– cable fastening with tensioning device to one side for smooth straight-line tensioning by means of self-locking trapezoidal threaded bolt
– cable ride platform combination consisting of a starting ramp, 1,90 m x 2,90 m, with an inclination of less than 20° inclination leading from play level to a height of 1,00 m, and a starting platform, 1,90 x 2,30 m, h = 1,00 m; both components furnished with a steel substructure and a square-shaped timber covering from Robinia
– cable (pre-assembled nominal length ready for installation) consisting of wire cable (10 mm; steel cable; zinc-plated 35 x 7, non-rotating; 16 outer strands; 19 inner strands; stoppers of low wear and low noise
– stainless steel cable pulley with three Polyamide rollers with anti-friction bearing
– swivel device (both from stainless steel) to minimise chain wear at the joint with the pendulum chain
– stainless steel chain with flexible thermically pressed-on natural rubber handle with internal chain; natural rubber pendulum seat

Minimum noise development caused by the pulley thanks to an elaborate cable construction by Kaiser & Kühne

The starting station must be built on a mound corresponding to the installation instructions. Thereby, it must be achieved that the maximum free height of fall at any point, referring to the starting platform, does not amount to more than 0,55 m above the impact surfacing.

Cable and pulley, pendulum seat and rubber handle will subsequently be delivered after dimensional measurement after installation of the supports and crossbeams (prescriptions for correct dimensional measurement will be enclosed to the first delivery).

Foundations (on site)
4 pcs. 0,80 x 0,80 x 0,80 m
4 pcs. 1,00 x 1,00 x 0,80 m
(welded wire fabrics are included with delivery)
3 pcs. 0,40 x 0,40 x 0,40 m
concrete amount: 5,44 m³

Approximate assembly values
2 mechanics 5 hours each, plus lifting gear
(without creating foundations)

Free height of fall
1,00 m

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity