Products

Water play structure

SKU: 834000432 Category:
SKU: 834000432 Category:

The most important information

:
;

Age group ?2+
Areas of use ?Public playgrounds
Number of users ?30 people
Activities ?Manual activity, Slide, Social activity

Technical data

:
;

Minimum space length ?15.25 m
Minimum space width ?15.06 m
Minimum space height ?3,23 m
Equipment length ?12.21 m
Equipment width ?11.83 m
Equipment height ?3,23 m
Free-fall height ?1,00 m
Platform heights-
Total weight ?2,110.00 kg
Heaviest single part ?104.00 kg

Assembly & Foundations

:
;

Assembly time ?14,0 h
Number of fitters ?2 people
Lifting equipment required-
FoundationsQuantity: 22x (0.4m x 0.4m x 0.4m)
Quantity: 11 (0.5m x 0.5m x 0.5m)
Quantity: 1 (0.7m x 0.5m x 0.5m)

Product description

:
;

Technical data
Total height: 3.23 m
Floor area: 11.83 x 12.21 m
Impact area: 15.25 x 15.06 m
Platform heights: 0.60/0.90 m

Support post
Posts made of stainless steel tube Ø 120 mm, covered with non-detachable stainless steel post caps. Connection of the modular add-on parts to the uprights using solid and fully welded stainless steel weld-in sleeves without protruding connecting elements.

Platform floor
Platform decking made from planks, 30 mm thick, with 45 x 100 mm square timber joists running the full length. The kiln-dried robinia sawn timber is planed, chamfered and free from rotten knots. The decking is securely fastened using special stainless steel brackets with a continuous bolted connection. Pump platform with profiled stainless steel sheet.

Attachments
- Access railing, roll-preventing, made of stainless steel tube, Ø 33.7 x 2 mm, consisting of horizontal railing tube and balustrade tubes arranged vertically on both sides
- Wooden balustrade made of robinia, 125 x 30 mm, fastened between stainless steel tubes Ø 33.7 x 2 mm
- Balcony parapet made of stainless steel tube
- Lattice balustrade made of stainless steel tube, Ø 33.7 x 2 / 25 x 2 mm, one-piece welded construction
- Stainless steel step with EPDM coating
- Climbing rung made of stainless steel tube, Ø 38 x 2.5 mm, twist-proof
– Sound installation: stainless steel sound tubes suspended from wire ropes. Mounted between stainless steel tubes, Ø 33.7 x 2 mm. Includes PVC mallets, attached to a support post by a stainless steel chain
– Wheel of Fortune panel made from 13 mm HPL laminate with excellent weather resistance, featuring a number disc mounted on a swivel bearing and a pointer cut from rubber. On the reverse side, there is a clock hand made from HPL laminate for manually setting the time.
- Telescope horizontally rotatable 360°, vertically adjustable
- Megaphone horizontally rotatable 360
- Rubber flag with fabric inlay
– stainless steel mud table with space underneath for wheelchairs
- Seat plate made of highly weather-resistant HPL laminate, 20 mm
– Table/awning made from highly weather-resistant 20/13 mm HPL laminate
- Gable roof, with round eaves, pitch 45°, made of highly weather-resistant HPL laminate, 13 mm, attached to roof frame made of stainless steel tube Ø 33.7 x 2 mm
– Attachable trough slide, attachment height 0.60 m, entry height 0.90 m, 0.60 m wide, single-piece stainless steel construction, sheet thickness: 2.5 mm, with anti-roll-off safety guard above the entry section. Includes a transfer platform in the seating area, height 0.30 m.

Water pump with hand wheel, item no. 0-33131-001
Water pump for direct connection to a water pipe, suction pipe connection 1 ¼ inch (pipe diameter at least ¾ inch)
Welded stainless steel construction, encapsulated pump housing, pump mechanism with roller and plain bearings, upper pump housing with handwheel must be removed, e.g. during the frost period.
Cover („winterisation plate“) for the remaining pump base is supplied

Please note:
When connecting the water pump to a pressurised water line, the valve combination (item no. 0-33190-000 or 0-33195-000) is required.

Please also observe the framework data specified in the installation instructions (spacing, diameter of the cables, etc.); these are available on request from K&K or directly as a PDF from our website at www.kaiser-kuehne.com.

Water pump with hand crank, item no. 0-33130-001
Water pump for direct connection to a water pipe, suction pipe connection 1 ¼ inch (pipe diameter at least ¾ inch)
Welded stainless steel construction, encapsulated pump housing, pump mechanism with roller and plain bearings, upper pump housing with swivel must be removed, e.g. during the frost period. Cover („winterisation plate“) for the remaining pump base is supplied.
Suitable for mounting on a solid surface, e.g. on a platform provided by the customer.

Please note:
When connecting the water pump to a pressurised water line, the K&K valve combination (item no. 0-33190-000 or 0-33195-000) is required.
Please also observe the framework data specified in the installation instructions (spacing, diameter of the cables, etc.); these are available on request from K&K or directly as a PDF from our website at www.kaiser-kuehne.com.

If the water supply is intentionally interrupted temporarily (timer or similar), a negative pressure builds up in the pipe system when the pump is operated again, which causes the pump swivel to kick back.
It is therefore essential to prevent the pump swivel arm from being actuated (e.g. by using the pump lock, part number 1040639).

Flange pipe
Flanged pipe for bolting onto a K&K water pump, to be set in concrete below the playing surface

Water distributing table (0,75)
Base area: 0.85 x 0.94 m
Total height: 0.90 m
Welded stainless steel construction with 2 water drain pipes. Rubber cone closure with locking mechanism for complete water drainage. Sheet thickness: min. 2 mm/ pipe Ø 38 mm.
Matching ring foundation (15166) for anchoring to the flange ring and moulded stones (15167) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Gutter (1.60), 2 pieces
Welded stainless steel construction. Sheet thickness: min. 2 mm / pipe Ø 38 mm. Bevelled outlet. Stepless inclination for installation for the required gradient for the water inlet and outlet through additional elevation.

Gutter (2.40), 2 pieces
Welded stainless steel construction. Sheet thickness: min. 2 mm / pipe Ø 38 mm. Bevelled outlet. Stepless inclination for installation for the required gradient for the water inlet and outlet through additional elevation.

Y-channel
Y-shaped water channel with one inlet area and two outlets, sheet thickness: min. 2 mm / pipe Ø 38 mm. Stepless inclination for installation for the required gradient for the inlet and outlet of the water through additional elevations.

Storage flap, 4 pcs.
Storage flap for water channels, freely positionable, stainless steel handle, rubber blade with fabric insert

Solitary bottom basin (without screw pump)
Welded stainless steel construction with a mounting bracket for the base bearing of the water spiral. Sheet thickness: min. 2 mm / tube Ø 38 mm. Water drainage opening sealed with a cylindrical screw.
Matching ring foundation (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Water spiral (2,00)
Spiral length: 2.00 m
Outer diameter: 0.25 m
Handwheel Ø: 0.80 m
Welded stainless steel construction with roller bearings, foot-mounted bearings for bolting on, including handwheel drive and top turntable

Modular catch basin
Welded stainless steel structure for water collection, with a water drainage opening. Sheet thickness: min. 2 mm / pipe Ø 38 mm. For attachment to posts.

Distribution channel, item no. 0-33493-000
Base area: 0.35 x 1.05 m
Welded stainless steel construction with adjustable, shock-absorbing tilting mechanism for two-way water distribution, with elevation and water channel with edge protection tube Ø 38 x 2 mm, sheet thickness min. 2 mm/tube Ø 38 mm

Mud plate (0.25), item no. 0-33450-000
Base area: Ø 1.04 m
Total height: 0.32 m
Welded stainless steel construction with 6 water drainage openings. Sheet thickness: min. 2 mm/pipe Ø 38 mm. Anchored to the flange ring.
Matching ring foundation (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Water bowl (0.25) Article no. 0-33430-000
Total height: 0.40 m
Welded stainless steel construction with 1 water drainage opening. Sheet thickness: min. 2 mm/pipe Ø 38 mm.
Matching ring foundation (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Water bowl (0.50) Article no. 0-33431-000
Base area: 0.84 x 1.00 m
Total height: 0.62 m
Weight: 55 kg in total
Welded stainless steel construction with 1 water drainage opening. Sheet thickness: min. 2 mm/pipe Ø 38 mm. Anchored to the flange ring.
Matching ring foundation (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Water table (0.25) Article no. 0-33440-000
Total height: 0.40 m
Welded stainless steel construction with 1 water drain pipe. Rubber cone closure with locking mechanism for complete water drainage. 2 shelves. Sheet thickness: min. 2 mm / pipe Ø 38 mm. Anchored to the flange ring.
Matching ring foundation (15165) for anchoring to the flange ring and moulded stones (15170) for bricking up and levelling height differences or for secure foundation in loose fall protection (sand, fine gravel, etc.) can be supplied at an extra charge.

Metal components: Stainless steel. The robinia wood is treated with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment also reduces cracking. The modular add-on parts transfer their forces directly to the uprights via a special adapter fastening. The screw connections are secured against unauthorised loosening.

Foundations (client-provided)
22 units 0.40 x 0.40 x 0.40 m
11 pieces, 0.50 x 0.50 x 0.50 m
1 piece 0.50 x 0.70 x 0.50 m

Assembly time
2 fitters, 14 hours each
(without foundation, without water connection)

Free fall height
1,00 m

Suitable for
Children aged 2 or 4 and over,
public playgrounds etc.,
Manual activities

Item number: 834000432