Water Play Structures

Technical data
Total height: 1,60 m
Area: 3,65 x 3,95 m
Minimum space: 6,65 x 6,95 m (36 m²)
Platform height: 0,40 m
Weight: 45 kg heaviest single component
310 kg as a whole

Posts
Posts made from stainless steel tubes Ø 120 x 3 mm covered by non-detachable protective stainless steel caps.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.
The pump platform is additionally covered by profiled stainless steel sheet.

Attachment parts
– stepped handrail from stainless steel tube Ø 33,7 x 2 mm

Water pump item no. 0-33131-001
Suction pipe connection 1 ¼ in (pipe diameter at least ¾ in), welded stainless steel construction, fully encapsulated pump housing, pump mechanism with roller and anti-friction bearing. During winter season, a removal of the upper housing and the hand wheel is indispensable, (winter) cover panel for the bottom part is included with delivery.

Please note:
The installation of the water pump to a pressure water pipe requires a K&K Valve combination (item no. 0-33190-000 or 0-33195-000).
Please also consider the basic technical details given in the installation instructions (such as spacing, pipe diameters etc.); upon request, you will receive them directly from K&K or by downloading the corresponding PDF from www.kaiser-kuehne.com.

Water trough 1,60 m
Welded stainless steel construction 0,80 m x 1,60 m, Sheet metal thickness: min. 2 mm / tube Ø 38 mm. For post attachment and with additional trough support for inclined installation corresponding to water feed or water run-off. Inclined run-off, including flexible flap with stainless steel knob and reinforced rubber blade.

Distribution funnel
Stainless steel funnel with inclined run-off, with infinite rotation by 360°, attached to stainless steel tube Ø 120 x 3 mm

Water trough 0,80 m, 2 pieces
Welded stainless steel construction, sheet metal thickness: min. 2 mm / tube Ø 38 mm. Inclined run-off. With additional trough support for inclined installation corresponding to water feed or water run-off.

Mixing plate (0,25) item no. 0-33450-000
Welded structure made of stainless steel with six water outlets. Sheet metal thickness: min. 2 mm/ tube Ø 38 mm. Anchorage by means of ring-shaped bottom flange. At extra charge, there are appropriate ring-shaped concrete foundations (015165) for flange fastening and concrete form blocks (015170) for masonry works to compensate different levels or for a safe installation with loose fall protection surfacing (sand, gravel etc.)

Water table (0,25) item no. 0-33440-000
Total height: 0,40 m
Welded structure made of stainless steel with one water outlet and one storage surface. Conical rubber closing with locking mechanism. Sheet metal thickness: 2,5 mm / tube Ø 38 mm.
Anchorage by means of ring-shaped bottom flange. At extra charge, there are appropriate ring-shaped concrete foundations (015165) for flange fastening and concrete form blocks (015170) for masonry works to compensate different levels or for a safe installation with loose fall protection surfacing (sand, gravel etc.).

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof screw connections thanks to screws with security socket.

Foundations (on site)
5 pcs. 0,40 x 0,40 x 0,40 m
5 pcs. 0,50 x 0,50 x 0,50 m
concrete amount: 0,95 m³

Approximate assembly values
2 mechanics 2 hours each
(without creating foundations, without water supply connection)

Free height of fall
0,40 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
manual activity