Water Play Structures

Technical data
Area: 4,35 x 7,07 m
Minimum space: 7,35 x 10,07 m (52 m²)
Total height: 2,00 m
Platform height: 0,20/0,95 m
Weight: 55 kg heaviest single component
626 kg as a whole

Post
Post made from stainless steel tubes Ø 120 x 3 mm covered by non-detachable protective stainless steel caps.
Upper end of post level with platform is covered by a welded-on circular blank made from stainless steel.

Platform
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.
The pump platform is additionally covered by profiled stainless steel sheet.

Attachment part
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail, from stainless steel tube, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– cranked ladder rung from stainless steel tube Ø 33,7 x 2 mm
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid

Water pump item no. 0-33131-001
Suction pipe connection 1 ¼ in (pipe diameter at least ¾ in), welded stainless steel construction, fully encapsulated pump housing, pump mechanism with roller and anti-friction bearing. During winter season, a removal of the upper housing and the hand wheel is indispensable, (winter) cover panel for the bottom part is included with delivery.

Please note:
The installation of the water pump to a pressure water pipe requires a K&K Valve combination (item no. 0-33190-000 or 0-33195-000).
Please also consider the basic technical details given in the installation instructions (such as spacing, pipe diameters etc.); upon request, you will receive them directly from K&K or by downloading the corresponding PDF from www.kaiser-kuehne.com.

Y-shaped water trough
Welded stainless steel construction with one water feed and two run-offs, sheet metal thickness: 2 mm at least / tube Ø 38 mm. Including flexible flap with stainless steel knob and reinforced rubber blade, clamping device for tube attachment Ø 38 mm

Water wheel 0,60 m
Water wheel consisting of 12 paddle wheels, rounded on the front end, framed by side panels, mounted to a roller bearing. Sheet metal thickness: 2,5 mm, with tubular support Ø 38 mm facilitating water trough assembly

Water trough 1,60 m, 3 pcs.
Welded stainless steel construction, sheet metal thickness: at least 2 mm / tube Ø 38 mm, with additional trough support for inclined installation corresponding to water feed or water run-off. Inclined run-off.
Including flexible flap with stainless steel knob and reinforced rubber blade

Stand alone bottom basin for screw pump
Welded stainless steel construction with discharge drilling, closed by a cylinder screw. Screw connection of the bottom bearing of the screw pump. Sheet metal thickness 2 mm / tube Ø 38 mm.
At extra charge, there are appropriate ring-shaped concrete foundations (015168) for flange fastening and concrete form blocks (015169) for masonry works to compensate different levels or for a safe installation with loose fall protection surfacing (sand, gravel etc.).

Screw pump with hand wheel
Length: 2,00 m
Outer diameter: 0,25 m
Hand wheel diameter: 0,80 m
Welded stainless steel construction for post attachment, with roller bearings, base bearing facilitating screw fastening.

Collecting basin
Welded stainless steel construction with two discharge drillings (90° and 270°). Sheet metal thickness 2 mm / tube Ø 38 mm, for post attachment.

Water table (0,50)
Base area: 0,84 x 1,84 m
Total height: 0,62 m
Welded stainless steel construction with one tubular run-off and four storage surfaces. Conical rubber closing with locking mechanism. Sheet metal thickness: 2,5 mm / tube Ø 38 mm.
At extra charge, there are appropriate ring-shaped concrete foundations (015165) for flange fastening and concrete form blocks (015170) for masonry works to compensate different levels or for a safe installation with loose fall protection surfacing (sand, gravel etc.)

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof screw connections thanks to protective screw caps.

Foundations (on site)
9 pcs. 0,40 x 0,40 x 0,40 m
7 pcs. 0,50 x 0,50 x 0,50 m
1 pc. 0,50 x 0,70 x 0,50 m
concrete amount: 1,63 m³

Approximate assembly values
2 mechanics 8 hours each
(without creating foundations, without water supply connection)

Free height of fall
1,20 m

Appropriate for
children from the age of 3 years up,
public playgrounds etc.,
manual activity