Cable Rides

Technical data
Area: 5,85 x 42,00 m
Minimum space: 6,00 x 43,10 m
Total length of cable: 40,00 m
Height of starting station: 2,70 m (without hill shaping)
Height of arrival station: 2,70 m (without hill shaping)

– Cable ride cross beam from hot-dip galvanised steel
– Tubular support made from hot-dip galvanised steel, with ring-shaped flange Ø 240 mm for the attachment
– Cable fastening with tensioning devices for smooth straight-line tensioning by means of self-locking trapezoidal threaded bolt
– steel cable Ø 10 mm, zinc-plated, with shock-absorbing stoppers
– stainless steel cable pulley with three Polyamide rollers with anti-friction bearing
– stainless steel chains with flexible thermically pressed-on natural rubber handle and safety pendulum seat
– universal joint between chain and chain adaptor for minimum wear and tear

Minimum noise development caused by the pulley thanks to an elaborate cable construction by Kaiser & Kühne

The starting station must be built on a mound corresponding to the installation instructions. Thereby, it must be achieved that the maximum free height of fall at any point, referring to the starting platform, does not amount to more than 0,55 m above the impact surfacing.

Cable and pulley, pendulum seat and rubber handle will subsequently be delivered after dimensional measurement after installation of the supports and crossbeams (prescriptions for correct dimensional measurement will be enclosed to the first delivery).

Foundations (on site)
8 pcs. 1,00 x 1,00 x 1,00 m
concrete amount: 8 m³

Approximate assembly values
2 mechanics 5 hours each, plus lifting gear
(without creating foundations)

Free height of fall
1,00 m

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity