Technical data
Area: 18,35 x 7,10 m
Minimum space: 21,40 x 10,15 x 2,37 m (141 m²)
Total height: 2,37 m
Platform height: 0,20/0,40/0,80/1,20 m
Weight: 88 kg heaviest single component
2030 kg as a whole
Post
Post made from stainless steel tubes Ø 120 x 3 mm covered by non-detachable protective stainless steel caps.
Upper end of post level with platform is covered by a welded-on circular blank made from stainless steel.
Platform
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.
The pump platform is additionally covered by profiled stainless steel sheet.
Attachment part
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail, from stainless steel tube, Ø 33,7 x 2 mm
– cranked ladder rung from stainless steel tube Ø 33,7 x 2 mm
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– stepped guardrail, from stainless steel tube, Ø 33,7 x 2 mm
Water pump item no. 033130001 resp. 033131001
Suction pipe connection 1 ¼ in (pipe diameter at least ¾ in), welded stainless steel construction, fully encapsulated pump housing, pump mechanism with roller and anti-friction bearing. During winter season, a removal of the upper housing and the handle resp. the hand wheel is indispensable, (winter) cover panel for the bottom part is included with delivery.
Please note:
The installation of the water pump to a pressure water pipe requires a K&K Valve combination (item no. 0-33190-000 or 0-33195-000).
Please also consider the basic technical details given in the installation instructions (such as spacing, pipe diameters etc.); upon request, you will receive them directly from K&K or by downloading the corresponding PDF from www.kaiser-kuehne.com.
Flange pipe for Water pump
for water pump fastening fastening, concrete-cast embedding below playing surface
Y-shaped water trough
Welded stainless steel construction with one water feed and two run-offs, sheet metal thickness: 2 mm at least / tube Ø 38 mm
Water wheel Ø 0,60 m
Water wheel consisting of 12 paddle wheels, rounded on the front end, framed by side panels, mounted to a roller bearing. Sheet metal thickness: 2,5 mm, with tubular support Ø 38 mm facilitating water trough assembly
Water trough
Welded stainless steel construction, sheet metal thickness: at least 2 mm / tube Ø 38 mm, with additional trough support for inclined installation corresponding to water feed or water run-off. Inclined run-off.
Including flexible flap with stainless steel knob and reinforced rubber blade
Flap for solitary or modular water troughs
Slidable flap for water troughs, with stainless steel knob and reinforced rubber blade. Limited shifting on choice.
Water mill 0,60 m
Water mill with six half-shells with edge protection. Wheel bearing with maintenance-free roller bearings.
Distribution funnel
Stainless steel funnel with inclined run-off, with infinite rotation by 360°, attached to stainless steel tube Ø 120 x 3 mm
Scoop wheel mounted to tandem guardrail 1.60 m
scoop wheel from stainless steel, sheet metal thickness: at least 2 mm / tube Ø 38 mm, including storage pan and run-off basin, coloured HPL elements
Water storage basin
Welded structure made of stainless steel with two water discharge pipes. Stainless steel safety cover, conical stopper made of rubber with fixing device for total removal of water. Thickness of sheet metal: 2,5 mm/tube Ø 38 mm.
Anchorage by means of ring-shaped bottom flange.
Water table
Welded stainless steel construction with one tubular run-off and four storage surfaces. Conical rubber closing with locking mechanism. Sheet metal thickness: 2 mm / tube Ø 38 mm.
Mixing plate
Welded structure made of stainless steel with six water outlets. Sheet metal thickness: 2,5 mm/ tube Ø 38 mm. Anchorage by means of ring-shaped bottom flanges.
Distributing table
Welded structure made of stainless steel with two water outlets. Conical stopper made of rubber with fixing device for total removal of water. Thickness of sheet steel: min. 2 mm/pipe Ø 38 mm. Anchorage by means of ring-shaped bottom flange.
Distributing trough
Welded structure made of stainless steel with adjustable, shock absorbing tilt-mechanism to distribute the waterflow in opposite directions.
Thickness of steel sheet: 2,5 mm/tube Ø 38 mm. with tubular support and water trough with tubular edge protection Ø 38 x 2 mm
Blechdicke 2,5 mm
Water scales
Welded structure made of stainless steel with adjustable, shock absorbing tilt-mechanism to distribute the waterflow in opposite directions. Sheet metal thickness: min. 2 mm / tube Ø 20 mm and Ø 38 mm.
Water swirl table
Welded stainless steel construction with five adjustable triangular HPL plates for water flow obstruction. Sheet metal thickness: 2,5 mm, tube Ø 33,7 mm resp. Ø 30 mm
Anchorage by means of ring-shaped bottom flange
Foundations (on site)
20 pcs. 0,40 x 0,40 x 0,40 m
18 pcs. 0,50 x 0,50 x 0,50 m
1 pc. 0,50 x 0,70 x 0,50 m
2 pcs. 0,50 x 0,50 x 0,40 m
2 pcs. 0,30 x 0,30 x 0,40 m
concrete amount: 4,00 m³
Approximate assembly values
3 mechanics 40 hours each
(without creating foundations, without water supply connection)
Free height of fall
1,30 m
Appropriate for
children from the age of 3 years up,
public playgrounds etc.,
manual activity