Sand Play Equipment

Technical data
Total height: 3,15 m
Area: 6,40 x 6,85 m
Minimum space: 9,40 x 10,35 m (55 m²)
Platform heights: 0,60 up to 1,20 m
Slide installation height: 0,80 m
Slide entrance height: 0,90 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 70 kg heaviest single piece
825 kg as a whole

Posts
Posts made from stainless steel tubes Ø 12 cm covered by non-detachable protective stainless steel caps.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– tandem guardrails from stainless steel tubes, Ø 33,7 x 2 mm
– infill panel from highly weather-resistant coloured HPL, fastening between stainless steel tubes Ø 33,7 x 2 mm
– stepped handrail from stainless steel tube Ø 33,7 x 2 mm
– sloped chain ladder with stainless steel rungs
– megaphone with horizontal rotation by 360°
– revolving steering wheel on infill panel from highly weather-resistant coloured HPL, fastening between stainless steel tubes Ø 33,7 x 2 mm
– infill panel from highly weather-resistant coloured HPL with sand chute and shutter, fastening between stainless steel tubes Ø 33,7 x 2 mm
– sand pulley with rubber scoop and stainless steel chain, link thickness of 4 mm. Continuous loop construction to block its drawing into adjoining playing areas/free spaces
– t-shaped stainless steel rail with rubber scoop for sand transport
– sand chute from red HPL in a tubular stainless steel frame
– wave-shaped counter/bench: made from highly weather-resistant HPL panel (20 mm thickness)
– rubber flag with fabric insert, for fastening on top of a post
– attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with security socket.

Foundations (on site)
16 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 1,14 m³

Approximate assembly values
2 mechanics 8 hours each
(without creating foundations)

Free height of fall
1,20 m

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
social/physical activity