Sand Play Equipment

Technical data
Area: 1,60 x 2,85 m
Minimum space: 4,60 x 5,85 m (21 m²)
Total height: 2,00 m
Weight: 25 kg heaviest single component
170 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps.
Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Attachment parts
– infill panel from highly weather-resistant coloured HPL (yellow) with sand chute and shutter, fastening between stainless steel tubes Ø 33,7 x 2 mm
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– counter/awning made from yellow/red highly weather-resistant HPL panel (15 mm thickness)
– seat made from red highly weather-resistant HPL panel (20 mm thickness)
– sand pulley with rubber scoop and stainless steel chain, link thickness of 4 mm. Continuous loop construction to block its drawing into adjoining playing areas/free spaces

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw cap.

Foundations (on site)
6 pcs. 0,40 x 0,40 x 0,40 m
concrete amount: 0,38 m³

Approximate assembly values
2 mechanics 2 hours each
(without creating foundations)

Free height of fall
0,60 m

Appropriate for
children from the age of 2 years up,
public playgrounds etc.,
social / manual activities