Play Structures

Technical data
Area: 9,70 x 10,25 m
Minimum space: 13,20 x 13,75 m (131 m²)
Total height: 6,55 m
Platform heights: 0,50 up to 2,00 m
Slide entrance heights: 1,50/2,10 m
Weight: 190 kg heaviest single piece
3105 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– steep climb up ramp from Robinia with tandem guardrail from stainless steel tubes and fixed Hercules climbing rope
– climb up ramp from Robinia fitted with a pair of stainless steel chains for drawbridges
– stairs for post attachment made from Robinia 170 x 45 mm, fixed to stainless steel framework Ø 33,7 x 2 mm, step spacing 133 mm
– pair of Robinia infill barriers for the stairs, fastening between stainless steel tubes Ø 33,7 x 2 mm
– seat/table made from highly weather-resistant red HPL panel (20/15 mm thickness)
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section
– climbing bar from stainless steel tube Ø 38 mm
– megaphone with horizontal rotation by 360°
– tent roof with stainless steel hood on top, 6 x 0,80 m / 45° inclination, made from highly weather-resistant HPL panels (brown), 13 mm thickness; fastening to stainless steel frame Ø 33,7 x 2 mm
– tower-shaped roof , 75° inclination, made from highly weather-resistant HPL panels (brown), 13 mm thickness; fastening to stainless steel frame Ø 33,7 x 2 mm, stainless steel hood on top
– rotating tower flag
– wide attachment slide, width 1,10 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.

Foundations (on site)
7 pcs. 0,30 x 0,30 x 0,40 m
37 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
1 pc. 0,40 x 1,25 x 0,40 m
concrete amount: 2,94 m³

Approximate assembly values
3 mechanics 26 hours each
(without creating foundations)

Free height of fall
2,10 m

Appropriate for
children from the age of 3 years up,
public playgrounds etc.,
physical activity