Play Structures

Tower combination 0-25310-500

Classic

Technical data
Total height: 8,33 m
Space occupied by the equipment: 13,69 x 4,85 x 8,33 m
Minimum space: 17,00 x 7,93 x 8,33 m
Free height of fall: 2,50 m
Impact area: 76 m²
Platform heights: 1,40/1,60/2,00/2,40/2,80/3,20/3,60 m
Slide installation height: 3,60 m
Slide entrance height: 3,70 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 410 kg heaviest single component
2410 kg as a whole

Posts
Posts made from stainless steel tubes Ø 120 mm covered by non-detachable protective stainless steel caps. Attachment of the modular components to the posts by means of sturdy fully welded stainless steel sockets without protruding parts.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrails with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrails from stainless steel tubes, Ø 33,7 x 2 mm
– infill barriers from stainless steel tubes, Ø 33,7 x 2 / 25 x 2 mm, one-piece welded assembly
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– climbing wall with six cut-outs from highly weather-resistant coloured HPL, 20 mm thickness, framed by stainless steel tubes
– sloping tottery stairs 0,80 m x 2,40 m, suspended from tandem railings, rungs from Robinia logs Ø 10 cm, fine stainless steel chains
– cranked ladder rungs made from stainless steel tubes Ø 33,7 x 2 mm
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– counter/awning from highly weather-resistant coloured HPL, 15 mm thickness
– seat made from highly weather-resistant coloured HPL, 20 mm thickness
– entrance guardrail with roll-off prevention, welded assembly from stainless steel tubes Ø 33,7 x 2 mm, consisting of a horizontal guardrail and vertically positioned bent retaining tubes
– tower-shaped roof, 72° inclination, from highly weather-resistant HPL, 13 mm thickness, round edges
– trapezoid pent roof from highly weather-resistant coloured HPL, 13 mm thickness, fastening to a frame from stainless steel tubes Ø 33,7 x 2 mm
– tunnel hill slide 36°, installation height 3,60 m, curved at 36° to the left, sliding sections from stainless steel, of low noise level thanks to tunnel shape, incl. stainless steel support post Ø 120 mm, with stainless steel fastening flange
– vertical climbing pole made from stainless steel tube, Ø 38 mm
– Samba ladder made from stainless steel tubes
– plank bridge: V-shaped climbing net construction from Hercules ropes, Robinia footbridge with approx. 40 mm clear distance between the planks. Attachment to a steel frame construction. Barrier height approx. 0,75 m, stainless steel support posts Ø 20 mm

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with security socket.

Foundations (on site)
9 pcs. 0,50 x 0,50 x 0,60 m
9 pcs. 0,40 x 0,40 x 0,60 m
2 pcs. 1,00 x 0,50 x 0,60 m
1 pc. 0,30 x 0,30 x 0,40 m
1 pc. 0,90 x 0,75 x 0,40 m
concrete amount: 3,12 m³

Approximate assembly values
3 mechanics 16 hours each
(without creating foundations)

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity

For more information please contact us