Play Structures

Technical data
Space occupied by the equipment: 4,82 x 3,80 x 2,17 m
Minimum space: 7,82 x 7,17 x 2,17 m
Platform heights: 0,60 m/0,80 m
Slide installation height: 0,80 m
Slide entrance height: 0,90 m
Total height: 2,17 m
Free height of fall: 1,32 m
Impact area: 35 m²
Weight: 70 kg heaviest single piece
720 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps.
Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay.
Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– infill panels made from highly weather-resistant HPL (red/yellow), fastening between stainless steel tubes Ø 33,7 x 2 mm
– entrance guardrail with roll-off prevention, welded assembly from stainless steel tubes Ø 33,7 x 2 mm, consisting of a horizontal guardrail and vertically positioned bent retaining tubes
– climbing rung from stainless steel tube Ø 38 mm with twist protection
– seat plate made from a highly weather-resistant HPL panel, 20 mm thickness
– slide rule with Polyamide elements Ø 80 mm, mounted to welded stainless steel tubes Ø 20 mm
– infill panel from HPL with wheel of fortune
– ramp 14°, free of barriers, surfacing made from profiled boards, 95 x 30 mm
– saddle roof, 45° inclination, made from coloured highly weather-resistant HPL panels, 13 mm thickness, fastening to stainless steel frame Ø 33,7 x 2 mm
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to protective screw caps.

Foundations (on site)
7 pcs. 0,40 x 0,40 x 0,40 m
2 pcs. 0,30 x 0,30 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 0,64 m³

Approximate assembly values
2 mechanics 4 hours each
(without creating foundations)

Free height of fall
0,90 m

Appropriate for
children from the age of 2 years up,
public playgrounds etc.,
physical activity