Play Structures

Technical data
Area: 5,95 x 6,65 m
Minimum space: 8,95 x 10,15 x 5,40 m (55 m²)
Total height: 5,40 m
Platform heights: 0,20 bis 2,40 m
Slide entrance height: 1,70 m
Weight: 100 kg heaviest single component
955 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platform
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– stepped guardrail from stainless steel tubes, Ø 33,7 x 2 mm
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– sloping tottery stairs suspended from fine stainless steel chains fixed to tandem guardrails
– stainless steel climbing post Ø 159 x 3 mm, step surfacing from profiled stainless sheet steel
– seat 0,80 m made from highly weather-resistant coloured HPL panel (20 mm thickness)
– ladder rungs made from stainless steel tubes Ø 38 mm
– tower roof, inclination 80°, made from highly weather-resistant coloured HPL, 13 mm thickness
– attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel. Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.

Foundations (on site)
1 pc. 0,30 x 0,30 x 0,40 m
15 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 1,12 m³

Approximate assembly values
2 mechanics 8 hours each
(without creating foundations)

Free height of fall
1,80 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity