Play Structures

Technical data
Area: 8,30 x 10,20 m
Minimum space: 11,80 x 13,20 m
Impact area: 90 m²
Total height: 4,35 m
Free height of fall: 1,70 m
Platform height: 1,00/1,40/1,60 m
Slide entrance height: 1,70 m
Weight: 105 kg heaviest single piece
1415 kg as a whole

Posts
Posts made from stainless steel tubes Ø 120 mm covered by non-detachable protective stainless steel caps.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrails with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrails from stainless steel tubes, Ø 33,7 x 2 mm
– infill barrier from stainless steel tubes, Ø 33,7 x 2 / 25 x 2 mm, one-piece welded construction
– plank bridge: V-shaped climbing net construction from Hercules ropes, Robinia footbridge with approx. 40 mm clear distance between the planks. Attachment to a steel frame construction, barrier height approx. 0,75 m
– tottery bridge suspended from tandem crossbeams, Robinia logs Ø 10 cm, suspended from fine stainless steel chains, protection against the possibility of stepping through
– gable roof, 45° inclination, made from blue highly weather-resistant HPL panels, 13 mm thickness, fastening to stainless steel frame Ø 33,7 x 2 mm
– tent roof including whirligig, 45° inclination, made from highly weather-resistant HPL panels, 13 mm thickness, fastening to stainless steel frame Ø 33,7 x 2 mm
– bench seat: made from highly weather-resistant coloured HPL panel, 20 mm thickness
– climbing bar from stainless steel tube Ø 38 x 2,5 mm
– arch-shaped ladder from stainless steel tubes
– inclined chain ladder with stainless steel climbing rungs
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with security socket.

Foundations (on site)
3 pcs. 0,30 x 0,30 x 0,40 m
11 pcs. 0,40 x 0,40 x 0,40 m
4 pcs. 0,40 x 0,40 x 0,60 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 1,79 m³

Approximate assembly values
2 mechanics 14 hours each, add. lifting gear
(without creating foundations)

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity