Play Structures

Technical data
Space occupied by the equipment: 17,75 x 8,20 x 9,65 m
Minimum space: 20,80 x 14,20 x 9,65 m
Impact area: 186 m²
Total height: 9,65 m
Platform heights: 1,40 – 2,40 m
Slide installation height: 2,45 m
Slide entrance height: 2,55 m
Free height of fall: 2,55 m
Slide width: 0,60/1,10 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 235 kg heaviest single piece
5485 kg as a whole

Posts
Posts made from stainless steel tubes Ø 120 x 3 mm covered by non-detachable protective stainless steel caps.

Platform
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– wave-shaped blue panels made from highly weather-resistant HPL panels
– megaphone with horizontal rotation by 360°
– telescope with horizontal rotation by 360°, adjustable in height
– rotating snap-in steering wheel made from stainless steel, low wear, double roller bearing, inner and outer ring from steel tubes Ø 30 x 2 mm, 6 spokes from steel tubes Ø 20 x 2 mm
– telephone made from stainless steel
– spatial climbing net made from black Hercules ropes 0,80 x 1,60 m, Ø16 mm, tubular stainless steeel frame Ø 48,3 x 2 mm
– stainless steel climbing post Ø 159 x 3 mm, step surfacing made from profiled stainless sheet steel
– inclined ramp from Robinia timber with a tandem guardrail from stainless steel tubes with a fixed Hercules climbing rope Ø 18 mm
– sloped scramble up net made from Hercules ropes fixed to a stainless steel frame
– sloped chain ladder with stainless steel rungs
– climb up ramp from Robinia fitted with climbing elements made from HPL
– Samba ladder made from stainless steel tubes
– stairs for post attachment made from Robinia 170 x 45 mm, fixed to stainless steel framework Ø 33,7 x 2 mm, step spacing 133 mm
– pair of Robinia infill barriers for stairs, fastening between stainless steel tubes Ø 33,7 x 2 mm
– cannon-like stainless steel tube, mounted to highly weather-resistant green HPL panels
– wheel of fortune, 0,80 x 0,80 m made from a highly weather-resistant red HPL panel, 15 mm thickness, with clock face and hands from tailored rubber, fixed to a pivot bearing-
– slide rule with red or white Polyamide elements, Ø 80 mm, on bars from stainless steel tubes Ø 20 mm
– convex and concave distorting mirrors from high-gloss polished stainless steel, mounted to a frame from red HPL panels
– bench seat from Robinia with stainless steel cantilevers
– stainless steel wind vane with powder-coating (red/blue/yellow)
– rigging made from steel with powder-coating
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section
– wide attachment slide, width 1,10 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel. Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with security socket.

Approximate assembly values
4 mechanics 40 hours each
(without creating foundations)

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity