Play Structures

Technical data
Total height: 2,94 m
Space occupied by the equipment: 9,85 x 5,80 x 2,94 m
Minimum space: 13,35 x 9,01 x 2,94 m
Free height of fall: 2,72 m
Impact area: 96 m²
Platform heights: 1,40/1,60/1,80/2,00 m
Slide installation height: 2,00 m
Slide entrance height: 2,10 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 170 kg heaviest single component
1630 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– tandem guardrails from stainless steel tubes, Ø 33,7 x 2 mm
– bowed guardrails with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– climbing wall with 12 cut-outs from highly weather-resistant red HPL, 20 mm thickness, framed by stainless steel tubes
– vertical climbing pole from stainless steel tube Ø 38 mm
– climbing net from Hercules ropes suspended from stainless steel tandem crossbeam
– sloped scramble up net fixed to stainless steel crossbeam
– straight ladder rungs made from stainless steel tubes Ø 38 mm
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– sloped chain ladder with stainless steel rungs
– arch-shaped ladder from stainless steel tubes
– inclined ramp from Robinia timber with a tandem guardrail from stainless steel tubes with a fixed Hercules climbing rope Ø 18 mm
– plank bridge: V-shaped climbing net construction from Hercules ropes, Robinia footbridge with approx. 40 mm clear distance between the planks. Attachment to a steel frame construction. Barrier height approx. 0,75 m, stainless steel support posts Ø 20 mm
– horizontal monkey bars 0,80 x 2,40 m, from stainless steel tubes Ø 38 x 2,5/33,7 x 2 mm
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to protective screw caps.

Foundations (on site)
22 pcs. 0,40 x 0,40 x 0,40 m
2 pcs. 0,60 x 1,00 x 0,50 m
7 pcs. 0,30 x 0,30 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 2,5 m³

Approximate assembly values
2 mechanics 16 hours each
(without creating foundations)

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity