Dalben Towers

Dalben tower (8,50) 9-12085-001



Dalben tower consisting of:
Dalben tower (8,50) with climbing net access made from chains (2,00 m) and tunnel slide (4,00 m); red tower hood / similar to RAL 2002 with three-piece wind rotor

Technical data
Area: approx. 4,75 x 11,70 m
Minimum space: approx. 7,85 x 15,20 m
Height: 8,50 m + tower top
Platform heights: 1,00 / 2,00 / 3,00 / 4,00 m
Slide installation height: 4,00 m
Slide entrance height: 4,10 m
Slide inclination: 30°
Sliding width: 0,80 m
Sliding sheet thickness: 2,5 mm

Laminated Larch Ø 200 mm with triple protective paint finish, supported by steel footings

Triangular timber platforms, laminated larch joists, platform covering from Robinia 95 x 30 mm, screw-fitted flange fixing to posts

Glass-bead blasted stainless steel ladder access from platform to platform (safety barrier included), height of the first rung: 0,50 m

Protective barriers (upwards from platform height 1,00 m)
Welded structure made of stainless steel tubes Ø 21/33,7 mm, glass bead blasted, screw-fitted flange fixing to posts

Tower hood
High pressure laminate 15 mm, red / similar to RAL 2002

Top element
Three-piece wind rotor

Access to platform at 2,00 m
climbing net access with balustrade from stainless steel tubes

K&K Tunnel slide 30°, installation height 4,00 m
Particularly low-noise thanks to trough-shaped sliding segments.

– 16100 K&K Tunnel slide entrance section
– 16110090 K&K Tunnel slide straight section,
length 0,90 m
– 16160 K&K Tunnel slide curved section, 6 pcs.,
30° to the right
– 16170 K&K Tunnel slide curved section, 6 pcs.,
30° to the left
– 16110070 K&K Tunnel slide straight section,
length 0,70 m
– 16180 K&K Tunnel slide runout-section

including K&K Hill slide support post for the curved section, made from stainless steel tube Ø 120 x 3 mm, stainless steel fastening flange

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Dowelling of each base plate by means of 2 stainless steel injection anchors, material specification A4.
As a damage protection, the tower is equipped with a lightning conductor.

Approximate assembly values
2 mechanics 18 hours each plus lifting gear
(without creating foundations)

Foundations (on site)
4 pcs. 1,00 x 1,00 x 0,50 m
3 pcs. 1,00 x 0,40 x 0,40 m
1 pc. 0,60 x 0,60 x 0,60 m
2 pcs. 0,30 x 0,30 x 0,40 m
concrete amount: 2,77 m³

Free height of fall
2,00 m

Appropriate for
children from the age of 8 years up,
public playgrounds etc.,
physical activity

The foundation sizes correspond to static requirements for soils with moderate solubility with an admissible footing pressure of at least ?R,d = 150 kN/m² for towers with four posts.
With a deviating soil characteristic or with installation in areas with a high wind load (differing from wind zone 2 in Germany, equates to vref = 25,0 m/s) or with a high snow load (differing from snow load zone 2 in Germany, equates to sk ?0,85 kN/m²), technical modifications of the product construction might become necessary (for instance the addition of cross bracings). Thereby, additional costs and the extension of the delivery time will arise.
Upon request of the customer, Kaiser & Kühne can engage a recognised engineering office to establish the necessary static calculation. The customer must bear the costs arising hereby. Any necessary evidence of the local conditions must be provided by the customer.

For more information please contact us