Dalben Towers

Dalben tower combination consisting of:
Dalben tower (8,50) with tunnel slide 30°/36° (4,00 m) and scramble up net access for platform height (2,00 m);
coloured tower hood / with whirligig

Technical data
Area: 5,65 x 9,55 m
Minimum space: 9,25 x 13,25 m (64 m²)
Height: 8,50 m + top element
Platform heights: 1,00 / 2,00 / 3,00 / 4,00 m
Slide installation height: 4,00 m
Height of slide entrance: 4,10 m
Slide inclination: 30°/36°
Slide width: 0,80 m
Sheet steel thickness: 2,5 mm
Weight: 450 kg heaviest individual component
2300 kg as a whole

Posts
Laminated Larch Ø 200 mm with triple protective paint finish, supported by steel footings

Platforms
Triangular timber platforms, laminated larch joists, platform covering from Robinia 95 x 30 mm, screw-fitted flange fixing to posts
Glass-bead blasted stainless steel ladder access from platform to platform (safety barrier included), height of the first rung: 0,50 m

Protective barriers (upwards from platform height 1,00 m)
Welded structure made of stainless steel tubes Ø 21/33,7 mm, glass bead blasted, screw-fitted flange fixing to posts

Tower hood
Coloured High pressure laminate 15 mm

Top element
Coloured whirligig

Climb up to platform height 2,00 m
– climbing net access from coloured Hercules ropes, Ø 16 mm, mesh size 300 m x 300 mm (axial dimension)

Tunnel slide 30°/36°, installation height 4,00 m
One-piece welding construction, particularly low-noise thanks to trough-shaped sliding segments consisting of the following parts:

– 16100 Tunnel slide entrance section (30°)
– 16130 Waved section 30°/36° for tunnel slide
– 16166 Curved section for 36° tunnel slide, 8 pcs.,
40° to the right
– 16116085 Straight section for 36° tunnel slide,
length 0,85 m
– 16186 Tunnel slide run-out section 36°

including hill slide support post for the curved section, made from stainless steel tube Ø 120 x 3 mm, stainless steel fastening flange

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Anchorage
Dowelling of each base plate by means of 2 stainless steel injection anchors, material specification A4.
As damage protection, the tower is equipped with a lightning conductor.

Approximate assembly values
2 mechanics 18 hours each plus lifting gear
(without creating foundations)

Foundations (on site)
4 pcs. 1,00 x 1,00 x 0,50 m
3 pcs. 1,00 x 0,40 x 0,40 m
1 pc. 0,40 x 0,40 x 0,60 m
concrete amount: 2,58 m³

Free height of fall
2,00 m

Appropriate for
children from the age of 8 years up,
public playgrounds etc.,
physical activity