Dutch Disc

Technical data
Base area: Ø 3,05 m
Minimum space: Ø 9,05 m (65 m²)
Total height: 0,80 m
Clearance above ground surface: 0,40-0,65 m
Weight: 450 kg heaviest single component
740 kg as a whole

Rotating floor: stainless steel/EPDM surfacing, plane bottom side
Roller bearing: tamper-proof and dirt-protected
The disc is anchored by means of a ring-shaped flange for concrete-cast embedding.

Please keep in mind that shock-absorbing surfacing material corresponding to the standard EN 1176-1 as well as „synthetic fall protection“ are admissible. Within the scope of maintenance, the characteristics of fall protection of the material must not decrease due to compaction or abrasion; with synthetic fall protection, due to reduced surface smoothness, a potential health hazard for ligaments or sinews must be calculated.

Foundation (on site)
1 pc. 1,10 x 1,10 x 0,80 m
concrete amount: 0,97 m³

Approximate assembly values:
2 mechanics, 1 hour each
(without creating foundations)
+ lifting gear

Free fall height:
0,80 m

Appropriate for:
children from the age of 8 years up
public playgrounds etc.
physical activities

Please note:
Upon request, the ring-shaped ground anchorage can be delivered in advance to facilitate foundation works in good time and to ensure a proper concrete setting before installation of bearing and disc.
If an advanced delivery is favoured, please give us a brief feedback and the delivery address when placing the order.