Technical data
Area: 4,75 x 5,25 m
Minimum space: 7,60 x 8,75 m (49 m²)
Total height: 2,75 m
Platform heights: 0,20 up to 1,00 m
Slide entrance height: 1,10 m
Weight: 75 kg heaviest single component
845 kg as a whole
Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps.
Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.
Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.
Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail, from stainless steel tubes, Ø 33,7 x 2 mm
– stepped handrail from stainless steel tube Ø 33,7 x 2 mm
– Robinia infill barrier, 125 x 30 mm, installed between stainless steel tubes Ø 33,7 x 2 mm
– Robinia climp up ramp with attached climbing elements made from HPL
– sand pulley with rubber scoop and stainless steel chain, link thickness of 4 mm. Continuous loop construction to block its drawing into adjoining playing areas/free spaces
– sand chute from red HPL in a tubular stainless steel frame
– sand funnel with stainless steel half-shell
– gable roof, 45° inclination, from highly weather-resistant coloured HPL, 13 mm thickness. fastening between stainless steel tubes Ø 33,7 x 2 mm
– attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section
For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.
Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.
Foundations (on site)
2 pcs. 0,30 x 0,30 x 0,40 m
17 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 1,28 m³
Approximate assembly values
2 mechanics 10 hours each
(without creating foundations)
Free height of fall
1,10 m
Appropriate for
children from the age of 2 years up,
public playgrounds etc.,
social/physical activity