Climbing Structures

Technical data
Total height: 2,88 m
Area: 4,55 x 8,25 m
Minimum space: 7,76 x 11,46 m (63 m²)
Platform height: 1,60 m
Slide entrance height: 1,70 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Height of climbing bar: 1,70 m
Weight: 105 kg heaviest single component
540 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps.
Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrails with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– climb up ramp from Robinia fitted with climbing elements made from HPL
– climbing bar from stainless steel tube Ø 38 mm with twist protection
– arch-shaped ladder from stainless steel tubes
– corrugated climbing pole with horizontal semicircular tube attachment
– climbing poles and climbing rungs from stainless steel tube Ø 38 mm
– climbing net from Hercules ropes suspended from stainless steel tandem crossbeam, twisted at an angle of 90°
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to protective screw caps.

Foundations (on site)
7 pcs. 0,30 x 0,30 x 0,40 m
8 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 0,9 m³

Approximate assembly values
2 mechanics 7 hours each
(without creating foundations)

Free height of fall
2,77 m

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity