Play Structures

Technical data
Area: 9,25 x 10,50 m
Minimum space: 12,75 x 14,30 m (95 m²)
Total height: 6,00 m
Platform height: 1,00/2,00/3,00 m
Slide entrance height: 2,10/3,10 m

Posts
Posts made from stainless steel tubes Ø 120 mm covered by non-detachable protective stainless steel caps

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– tubular stainless steel infill barrier, Ø 33,7 x 2 / 25 x 2 mm, one-piece welded assembly
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– infill panels from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– climbing wall with 12 cut-outs from highly weather-resistant red HPL, 20 mm thickness, framed by stainless steel tubes
– sloped scramble up net made from Hercules rope, suspended from stainless steel crossbeam
– vertical climbing pole made from stainless steel tubes Ø 38 mm
– climbing rungs from stainless steel tube Ø 33,7 x 2 mm with twist protection
– tent roof with preassembled whirligig, 45° inclination, made from highly weather-resistant HPL panels, 13 mm thickness, fastening to stainless steel frame Ø 33,7 x 2 mm
– attachment slide, width 1,10 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section
– tunnel hill slide, width 0,60 m resp. 0,80 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with stainless steel support post Ø 120 mm

For your planning, due to a possible sliding surface heating, please see to a north-east orientation (northern hemispere) of the slides or provide half-shade of trees.
For countries in the southern hemisphere, see to a south-east orientation.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with security socket.

Foundations (on site)
20 pcs. 0,40 x 0,40 x 0,40 m
2 pcs. 0,30 x 0,30 x 0,40 m
1 pc. 0,40 x 0,40 x 0,60 m
1 pc. 1,40 x 0,75 x 0,40 m
1 pc. 0,40 x 1,25 x 0,40 m
concrete amount: 2,07 m³

Approximate assembly values
4 mechanics 10 hours each
(without creating foundations)

Free height of fall
2,10 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity