Play Structures

Technical data
Area: 6,30 x 7,30 m
Minimum space: 9,70 x 10,80 m (71 m²)
Total height: 4,15 m
Platform heights: 0,60/0,80/1,00/1,20/m
Slide installation height: 0,80/1,00 m
Slide entrance height: 0,90/1,10 m
Weight: 110 kg heaviest single component
1715 kg as a whole

Posts
Posts made from stainless steel tubes Ø 120 x 3 mm covered by non-detachable protective stainless steel caps.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– inclined ramp/drawbridge from profiled Robinia planks, 95 x 30 mm
– stairs for post attachment made from Robinia 170 x 45 mm, fixed to stainless steel framework Ø 33,7 x 2 mm, step spacing 133 mm
– pair of Robinia infill barriers for the stairs, fastening between stainless steel tubes Ø 33,7 x 2 mm
– telescope with horizontal rotation by 360°, adjustable in height
– climbing wall from highly weather-resistant HPL, 20 mm thickness, framed by stainless steel tubes, with free climbing elements fitted to one side
– climb up ramp from Robinia fitted with climbing elements made from HPL
– seat made from highly weather-resistant HPL panel (20 mm thickness)
– saddle roof, 45° inclination, made from highly weather-resistant HPL panels, 13 mm thickness, fastening to stainless steel frame Ø 33,7 x 2 mm, with protective stainless steel hood/red rubber flag on top
– tower roof, inclination 80°, made from highly weather-resistant HPL, 13 mm thickness
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section
– trough-shaped attachment slide, width 1,10 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with security socket.

Foundations (on site)
5 pcs. 0,30 x 0,30 x 0,40 m
24 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
1 pc. 0,40 x 1,25 x 0,40 m
concrete amount: 2 m³

Approximate assembly values
2 mechanics 16 hours each
(without creating foundations)

Free height of fall
1,95 m

Appropriate for
children from the age of 2 years up,
public playgrounds etc.,
physical activity