Play Structures

Technical data
Total height: 4,30 m
Area: 5,67 x 6,45 m
Minimum space: 8,57 x 9,96 m (54 m²)
Platform heights: 0,80/1,00/2,00 m
Slide installation height: 2,00 m
Slide entrance height: 2,10 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 130 kg heaviest single component
930 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– sloped chain ladder with stainless steel rungs
– climbing rungs made from stainless steel tubes Ø 38 mm, with twist-protection
– climb up ramp from Robinia fitted with climbing elements made from HPL
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– plank bridge: V-shaped climbing net construction from Hercules ropes, Robinia footbridge with approx. 40 mm clear distance between the planks. Attachment to a steel frame construction, barrier height approx. 0,75 m
– tent roof, 45° inclination, made from highly weather-resistant HPL panels, 13 mm thickness, fastening to stainless steel frame Ø 33,7 x 2 mm

Hill slide 36° installation height 2,00 m
stainless steel sliding segments, of low noise thanks to trough-shaping, one-piece welded construction
course: curved at 27° to the right
including hill slide support post for the curved section as well as a fastening flange, respectively made from stainless steel

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.

Foundations (on site)
10 pcs. 0,40 x 0,40 x 0,40 m
2 pc. 0,30 x 0,30 x 0,40 m
1 pc. 0,40 x 0,40 x 0,60 m
1 pc. 0,90 x 0,75 x 0,40 m
concrete amount: 1,08 m³

Approximate assembly values
2 mechanics 8 hours each, plus lifting gear
(without creating foundations)

Free height of fall
2,10 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity