Play Structures

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.
One trapezoid platform is equipped with a reinforcing bracket of 6 mm thickness for entrance section fastening of the roller slide.

Attachment parts
– bowed guardrails with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrails from stainless steel tubes, Ø 33,7 x 2 mm
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm; with additional waling timber, 30 mm, for nominal heights of 1,50 m and more
– infill barriers from stainless steel tubes, Ø 33,7 x 2 / 25 x 2 mm, one-piece welded assembly
– stainless steel panel, 4 mm, for roller slide, with a single-pitch roof from highly weather-resistant coloured HPL, 13 mm, fastening between tubular stainless steel Ø 38 x 2,5 mm
– single-sided free climbing wall from highly weather-resistant coloured HPL, 20 mm, framed by tubular stainless steel
– (cranked) ladder rungs made from stainless steel tubes Ø 33,7 x 2 mm
– vertical climbing pole made from stainless steel tube, Ø 38 mm
– climb up ramp from Robinia fitted with climbing elements made from HPL, 20 mm
– seat made from highly weather-resistant coloured HPL, 20 mm thickness, mounted on top of a stainless steel tube, Ø 33,7 x 2 mm
– roller slide with receptacle for support post, one-piece welded assembly, sheet metal thickness 2,5 mm, grip hole on both sides of the entrance section, light domes made from break-proof Polycarbonate on both sides. Roller slide sections with interior handrail guideway made from stainless steel, stainless steel rollers mounted to anti-friction bearings, Ø 50 mm.
– tubular stainless steel support Ø 120 x 3 mm with plug-in base
– underground frame for roller slide exit anchorage, made from stainless steel tubes Ø 48,3 x 2,6 mm and flat steel cross-ties, 8 mm
– deflector for roller slide made from highly weather-resistant coloured HPL, fixed to a clamp terminal, assembly on site
– tower-shaped roof 72° from highly weather-resistant coloured HPL, 13 mm
– stainless steel hood with receptacle for a flag, bent for tower hoods 6 x 72°, 1,5 mm, with pre-assembled flag

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.