Play Structures

Technical data
Total height: 4,30 m
Area: 5,67 x 6,46 m
Minimum space: 8,57 x 9,96 m (54 m²)
Platform heights: 0,80/1,00/2,00 m
Slide installation height: 2,00 m
Slide entrance height: 2,10 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 130 kg heaviest single component
930 kg as a whole

Posts
Posts made from stainless steel tubes Ø 120 x 3 mm covered by non-detachable protective stainless steel caps. Attachment of the modular components to the posts by means of sturdy fully welded stainless steel sockets without protruding parts.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– sloped chain ladder with stainless steel rungs
– climbing rungs made from stainless steel tubes Ø 38 mm, with twist-protection
– climb up ramp from Robinia fitted with climbing elements made from HPL
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– plank bridge: V-shaped climbing net construction from Hercules ropes, Robinia footbridge with approx. 40 mm clear distance between the planks. Attachment to a steel frame construction, barrier height approx. 0,75 m
– tent roof, 45° inclination, made from highly weather-resistant HPL panels, 13 mm thickness, fastening to stainless steel frame Ø 33,7 x 2 mm

Hill slide 36° installation height 2,00 m
stainless steel sliding segments, of low noise thanks to trough-shaping, one-piece welded construction
course: curved at 27° to the right
including hill slide support post for the curved section as well as a fastening flange, respectively made from stainless steel

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.

Foundations (on site)
10 pcs. 0,40 x 0,40 x 0,40 m
2 pc. 0,30 x 0,30 x 0,40 m
1 pc. 0,40 x 0,40 x 0,60 m
1 pc. 0,90 x 0,75 x 0,40 m
concrete amount: 1,08 m³

Approximate assembly values
2 mechanics 8 hours each, plus lifting gear
(without creating foundations)

Free height of fall
2,10 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity