Hill Slides

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platform

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– infill barrier from stainless steel tubes, Ø 33,7 x 2 / 25 x 2 mm
– (cranked) climbing rung from stainless steel tubes Ø 33,7 x 2 mm
– stainless steel climbing post, step surfacing made from profiled stainless sheet steel
– climb up ramp from Robinia fitted with climbing elements made from HPL
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– tent roof, 45° inclination, made from highly weather-resistant HPL panels, 13 mm thickness, fastening to stainless steel frame Ø 33,7 x 2 mm
– stainless steel hood for tent roof 6 x 45°, thickness 1,5 mm
– attachment slide, width 0,60 m, of low noise thanks to trough-shaping, welded to a two-part slide for transport reasons, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section, with three stainless steel support posts for the curved sections, fastening flange at the run-out section, incl. corresponding connecting flanges to facilitate installation on site.

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.