Play Structures

Technical data
Total height: 4,19 m
Area: 2,69 x 5,87 m
Minimum space: 5,78 x 9,50 (36 m²)
Platform heights: 1,60/2,00 m
Slide installation height: 2,00 m
Slide entrance height: 2,10 m
Slide inclination: 36°
Sliding width: 0,60 m
Sliding sheet metal thickness: 2,5 mm
Weight: 125 kg heaviest single component
625 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– climbing bar with twist prevention, from stainless steel tube Ø 38 x 2,5 mm
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– sloped chain ladder with stainless steel rungs
– vertical climbing pole from stainless steel tube Ø 38 mm
– single-sided free climbing wall (0,80) from highly weather-resistant coloured HPL, 20 mm, tubular stainless steel frame, with free climbing elements on one side
– tent roof 45° / 6 x 0,80 m / rounded eaves, from highly weather-resistant coloured HPL, 13 mm, attachment to tubular stainless steel frame Ø 33,7 x 2 mm
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps (Red).

Foundations (on site)
6 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
1 pc. 0,30 x 0,30 x 0,40 m
concrete amount: 0,60 m³

Approximate assembly values
2 mechanics 5 hours each, plus lifting gear
(without creating foundations)

Free height of fall
2,10 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity