Play Structures

Technical data
Total height: 4,05 m
Area: 3,80 x 5,05 m
Minimum space: 7,20 x 8,05 m (43 m²)
Platform heights: 0,20 up to 0,80 m
Slide installation height: 0,80 m
Slide entrance height: 0,90 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 70 kg heaviest single component
820 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrails with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barriers from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– infill panel from highly weather-resistant HPL, fastening between stainless steel tubes Ø 33,7 x 2 mm
– slide rule with Polyamide elements, Ø 80 mm, on bars from stainless steel tubes Ø 20 mm
– wheel of fortune made from HPL panel
– stairs for post attachment made from Robinia 170 x 45 mm, fixed to stainless steel framework Ø 33,7 x 2 mm, step spacing 133 mm
– pair of Robinia infill barriers for the stairs, fastening between stainless steel tubes Ø 33,7 x 2 mm
– Robinia climp up ramp with attached climbing elements made from HPL
– stainless steel crawl tunnel, Ø 56 cm, thickness of sheet metal: 2,5 mm
– tower roof, inclination 80°, made from highly weather-resistant HPL, 13 mm thickness
– corrugated flag including flagpole
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to protective screw caps.

Foundations (on site)
14 pcs. 0,40 x 0,40 x 0,40 m
2 pcs. 0,30 x 0,30 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 1,09 m³

Approximate assembly values
2 mechanics 8 hours each
(without creating foundations)

Free height of fall
1,55 m

Appropriate for
children from the age of 2 years up,
public playgrounds etc.,
physical activity