Play Structures

Technical data
Space occupied by the equipment: 4,60 x 7,45 m
Minimum space: 7,85 x 11,00 m (65 m²)
Total height: 3,85 m
Platform heights: 1,40/1,60/1,80 m
Slide entrance height: 1,70 m
Slide width: 0,60/1,10 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 100 kg heaviest single piece
725 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail from stainless steel tubes, Ø 33,7 x 2 mm
– gable roof, 45° inclination, made from highly weather-resistant coloured HPL panels, 13 mm thickness. fastening on a tubular stainless steel frame
– seat made from highly weather-resistant coloured HPL panel, 20 mm thickness
– vertical climbing pole made from stainless steel tubes, Ø 38 mm
– inclined monkey bars, one-piece welded assembly from stainless steel tubes Ø 38 x 2,5/Ø 33,7 x 2 mm
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Stainless steel metal components. Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.

Foundations (on site)
1 pc. 0,30 x 0,30 x 0,40 m
13 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 0,99 m³

Approximate assembly values
2 mechanics 8 hours each
(without creating foundations)

Free height of fall
2,25 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity