Play Structures

Technical data
Total height: 8,50 m
Area: 6,95 x 13,55 m
Minimum space: 9,45 x 17,55 m (80 m²)
Platform heights: 0,60 bis 4,60 m
Weight: 650 kg heaviest single component
3510 kg as a whole

Posts
Posts made from stainless steel tubes Ø 120 mm covered by non-detachable protective stainless steel caps. Attachment of the modular components to the posts by means of sturdy fully welded stainless steel sockets without protruding parts.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– timber infill barriers from Robinia, 125 x 30 mm. fastening between stainless steel tubes Ø 33,7 x 2 mm
– tandem guardrails from stainless steel tubes, Ø 33,7 x 2 mm
– inclined ramp from Robinia timber with a tandem guardrail from stainless steel tubes with a fixed Hercules climbing rope Ø 18 mm
– tent roof, 45° inclination, from highly weather-resistant HPL panels, 13 mm thickness, with whirligig. Fastening to stainless steel frame Ø 33,7 x 2 mm including stainless steel edge protection with powder-coating

Helical tunnel slide (4,60)
Slide installation height: 4,60 m
Slide entrance height: 4,70 m
Slide inclination: 30°/38°
Slide width: 0,80 m
Sheet metal thickness: 2,5 mm

Sliding sections from stainless steel, of low noise level thanks to tunnel shape. Due to transport-related reasons, the slide is (in three parts) welded to a centre pylon including appropriate connecting flanges to facilitate installation on site.

Left-handed helix: 300°

Tunnel hill slide (3,00)
Slide installation height: 3,00 m
Slide entrance height: 3,10 m
Slide inclination: 30°
Slide width: 0,60/0,80 m
Sheet metal thickness: 2,5 mm

Sliding sections from stainless steel, low noise level thanks to trough-shaping, one-piece welded assembly.
Including tunnel slide support post from tubular stainless steel Ø 120 mm, stainless steel fastening flange.
Straight course

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof screw connections thanks to screws with security socket.

Foundations (on site)
7 pcs. 0,75 x 0,75 x 0,60 m
3 pcs. 1,00 x 0,40 x 0,40 m
1 pc. 0,80 x 0,80 x 1,00 m
1 pc. 0,40 x 0,40 x 0,60 m
1 pc. 1,40 x 0,75 x 0,40 m
3 pcs. 0,30 x 0,30 x 0,40 m
concrete amount: 4,11 m³

The foundation sizes indicated in this quotation correspond to static requirements for soils with moderate solubility with an admissible footing pressure of at least σR,d = 100 kN/m². With a deviating soil characteristic or with installation in areas with a high wind load (differing from wind zone 2 in Germany, equates to vref = 25,0 m/s) or with a high snow load (differing from snow load zone 2 in Germany, equates to sk ≥0,85 kN/m²), technical modifications of the product construction might become necessary (for instance the addition of cross bracings). Thereby, additional costs and the extension of the delivery time will arise.
Upon request of the customer, Kaiser & Kühne can engage a recognised engineering office to establish the necessary static calculation. The customer must bear the costs arising hereby. Any necessary evidence of the local conditions must be provided by the customer.

Approximate assembly values
4 mechanics 10 hours each, plus lifting gear
(without creating foundations)

Free height of fall
2,00 m

Appropriate for
children from the age of 8 years up,
public playgrounds etc.,
physical activity