Play Structures

Technical data
Total height: 6,87 m
Area: 15,89 x 1,73 x 6,87 m
Minimum space: 19,36 x 4,85 x 6,87 m
Free height of fall: 2,40 m
Impact area: 74 m²
Platform heights: 1,80/2,00/2,20/2,40/2,60 m
Slide installation height: 2,00 m
Slide entrance height: 2,10 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 106 kg heaviest single component
2167 kg as a whole

Posts
Posts made from stainless steel tubes Ø 12 cm covered by non-detachable protective stainless steel caps. Attachment of the modular components to the posts by means of sturdy fully welded stainless steel sockets without protruding parts.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– infill panel from highly weather-resistant coloured HPL, fastening between stainless steel tubes Ø 33,7 x 2 mm
– climbing wall with six cut-outs from highly weather-resistant coloured HPL, 20 mm thickness, framed by stainless steel tubes
– (cranked) ladder rung made from stainless steel tubes Ø 33,7 mm
– single-sided free climbing wall (0,80) from highly weather-resistant coloured HPL, 20 mm, framed by tubular stainless steel
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– climbing net made from Hercules ropes, framed by tubular stainless steel
. bench seat 0,80 m; from highly weather-resistant coloured HPL
– spatial tunnel-shaped net made from Hercules ropes, mesh size all around 125×125 mm, framed by stainless steel
– attachment slide, width 0,60 m, with roll-off prevention above the entrance section, one-piece welded assembly, with additional support beneath run-out section. Slide of low noise level thanks to trough-shaping.
– tower-shaped roof 72° from highly weather-resistant coloured HPL, 13 mm
– revolving tower flag with K&K logo

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with security socket.

Foundations (on site)
18 pcs. 0,40 x 0,40 x 0,60 m
2 pcs. 1,60 x 0,40 x 0,80 m
1 pc. 0,75 x 0,40 x 0,40 m
concrete amount: 2,9 m³

Approximate assembly values
3 mechanics 32 hours each
(without creating foundations)

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity