Play Structures

Tower combination 0-25460-700

Classic

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– tandem guardrails from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm; with additional waling timber, 30 mm, for nominal heights of 1,50 m and more
– infill barriers from stainless steel tubes, Ø 33,7 x 2 / 25 x 2 mm, one-piece welded assembly
– tubular stainless steel guardrails, Ø 33,7 x 2 mm, with twist protection
– tubular stainless steel climbing bars, Ø 38 x 2,5 mm, with twist protection
– inclined ramp from Robinia timber with a tandem guardrail from stainless steel tubes with a fixed Hercules climbing rope Ø 18 mm
– sloped scramble up net fixed to a stainless steel frame Ø 16 mm
– tower-shaped roof 72° from highly weather-resistant coloured HPL, 13 mm
– stainless steel hood with receptacle for a flag, bent for towers 6 x 72°, 1,5 mm, with pre-assembled flag
– trapezoid single-pitch roof, from highly weather-resistant coloured HPL, 13 mm, attachment to a stainless steel frame Ø 33,7 x 2 mm
– tent roof, 45° inclination, from highly weather-resistant HPL panels, 13 mm thickness. Fastening to stainless steel frame Ø 33,7 x 2 mm including stainless steel edge protection with coloured powder-coating
– stainless steel hood, bent for tent roofs 6 x 45°, 1,5 mm
– safety attachment for pipe railing, made from tubular stainless steel Ø 20 x 2 mm, for prevention of head entrapment between top edge of balustrades and the inner surfaces of a roof
– helical tunnel slide 30°/’38° from stainless steel, 2,5 mm, of low noise level thanks to tunnel shape, curved at 300° to the right; the slide is (in three parts) welded to a centre pylon including appropriate connecting flanges to facilitate installation on site
– tunnel hill slide 30°, installation height 3,00 m, straight course, sliding sections from stainless steel, of low noise level thanks to tunnel shape, one-piece welded assembly, with a receptacle for a support post
– tubular stainless steel support Ø 120 x 3 mm with plug-in base
– stabilising bar from stainless steel Ø 43,3 x 2,6, with twist protection
– jungle-like bridge consisting of:
– rope end Ø 125 mm with steel insert as tread
– lateral and upper nets from Hercules ropes Ø 16 mm, mesh size approx. 100 x 130 mm
– rope cross joint links by means of stainless steel wire clamps
– attachment to fastening frames by means of pressed-on fork joints resp. eye bolts
– ladder access from tubular stainless steel Ø 38 x 2 mm, height of the first rung: 0,50 m, glas-bead blasted, for additional subsequent platform attachment or for concrete-cast embedding
– pre-fabricated concrete foundation, rounded edges, two threaded inserts M12

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof screw connections thanks to screws with protective screw cap.

For more information please contact us