Water Play Structures

Water play structure 0-34070-702


Technical data
Total height: 1,57 m
Area: 2,40 x 3,33 m
Minimum space: 5,48 x 6,33 m (28 m²)
Platform heights: 0,20/0,40 m

Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps.
Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.
The pump platform is additionally covered by profiled stainless steel sheet.

Attachment parts
– stepped handrail from stainless steel tube Ø 33,7 x 2 mm
– horizontal bar with twist prevention, from stainless steel tube Ø 38 x 2,5 mm

Water pump
Suction pipe connection 1 ¼ in (pipe diameter at least ¾ in), welded stainless steel construction, fully encapsulated pump housing, pump mechanism with roller and anti-friction bearing. During winter season, a removal of the upper housing and the handle is indispensable, (winter) cover panel for the bottom part is included with delivery.

Please note:
The installation of the water pump to a pressure water pipe requires a K&K Valve combination (item no. 0-33190-000 or 0-33195-000).
If the water supply to the pump (through a clock timer or similar) is interrupted, the pump handle must be safeguarded against operation (for example by the K&K pump latch, item no. 1040639). This prevents a handle setback due to an increasing negative pressure.
Please also consider the basic technical details given in the installation instructions (such as spacing, pipe diameters etc.); upon request, you will receive them directly from K&K or by downloading the corresponding PDF from www.kaiser-kuehne-play.com.

Water storage basin
Base area: Ø 0,68 m
Welded stainless steel construction with one tubular run-off. Conical rubber closing with locking mechanism for complete water extraction. Sheet metal thickness: 2 mm at least / tube Ø 33,7 mm.

Water swirl table 0,80 m x 1,60 m
Welded stainless steel construction with 5 adjustable triangular HPL plates for water flow obstruction. Sheet metal thickness: 2 mm at least, tube Ø 33,7 mm resp. Ø 30 mm

Basin with one run-off for terracing installation
Base area: Ø 0,90 m
Total height: 0,14 m
Welded stainless steel construction for post attachment, with one discharge pipe, sheet metal thickness: 2 mm at least / tube Ø 38 mm

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation.
Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.

Foundations (on site)
11 pcs. 0,40 x 0,40 x 0,40 m
concrete amount: 0,70 m³

Approximate assembly values
2 mechanics 2 hours each
(without creating foundations)

Free height of fall
0,73 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
physical activity

For more information please contact us