Sand Play Equipment

Technical data
Floor space: 4,30 x 6,90 m
Minimum space: 7.35 x 10.40 m (54 m²)
Height: 1,75 m
Platform height: 0,80 m
Seat height: 0,90 m
Weight: 70 kg heaviest single part
675 kg total

Posts
Posts made of laminated robinia wood, cylindrically milled, Ø 120 mm. Unprotected end-grain surfaces are covered with non-detachable stainless steel post caps.
Tubular base made of stainless steel for the foundation and elevation of robinia roundwood posts, Ø 120 mm, below the play level.

Platform floor
Platform made of boards, 30 mm thick and surrounding squared timber beams 45 x 100 mm. The dried sawn timber from Robinia is planed, chamfered and free from rotting branches. Non-positive floor mounting by special stainless steel brackets with a continuous bolt connection.

Attachment parts
– Infill panel made of coloured, highly weather-resistant HPL. Mounting between stainless steel tubes Ø 33.7 x 2 mm
– Add-on staircase with treads made of robinia 170 x 45 mm, screwed onto stainless steel frame Ø 33.7 x 2 mm. Pitch height of the steps 133 mm
– Stair railing made of stainless steel tube, Ø 33.7 x 2 mm, twist-proof
– Table: made of coloured, highly weather-resistant HPL laminated board, 15 mm
– Crawl tunnel: Ø 56 cm, stainless steel sheet 2.5 mm
– Pouring pipe wall made of HPL laminate plate with sand pouring pipe including butterfly valve
– Sand border made of robinia 95 x 30 mm, planed, chamfered and free of rotten branches
– Play-and seat plate made of coloured, highly weather-resistant HPL laminated board, 20 mm
– Slide, 0.60 m wide, one-piece stainless steel construction, sheet thickness: 2.5 mm, with roll-off preventing fall protection above the single seat part

Please note for your planning that stainless steel slides are aligned to the north-east or stand in the semi-shade of trees due to the possible heating of the slide surface.

Metal components: Stainless steel. The robinia wood is provided with a water-repellent, breathable protective coating. In addition to protecting against moisture, this treatment reduces cracking. The modular add-on parts transfer their forces directly to the uprights via a special adapter attachment. The screw connections are secured against unauthorised loosening by means of cover caps.

Foundations (on site)
16 pieces 0.40 x 0.40 x 0.40 m
1 piece 0.40 x 0.75 x 0.40 m
concrete quantity: 1,14 m³

Time of assembly
2 fitters 5 hours each
(without foundation construction)

Free fall height
0,90 m

Suitable for
Children from 2 years of age,
public playgrounds etc.
social / manual activities.