Play Structures

Technical data
Area: 4,65 x 9,45 m
Minimum space: 8,16 x 12,42 m (68 m²)
Total height: 5,49 m
Platform heights: 0,20/0,40/0,60/0,80 m
Slide installation height: 0,80 m
Slide entrance height: 0,90 m

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– climb up ramp from profiled timber, 95 x 30 mm
– stairs for post attachment made from Robinia 170 x 45 mm, fixed to stainless steel framework Ø 33,7 x 2 mm, step spacing 133 mm
– pair of stainless steel infill barriers for stairs, Ø 33,7 x 2 / 20 x 2 mm, one-piece welded assembly
– stepped handrails made from stainless steel tubes Ø 33,7 x 2 mm, for step-line platforms
– infill panel from highly weather-resistant HPL, fastening between stainless steel tubes Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– gable roof, 45° inclination, from highly weather-resistant HPL, 13 mm thickness. fastening on a tubular stainless steel frame
– tower roof, 75° inclination, from highly weather-resistant HPL, 13 mm thickness.
– straight revolving red flag/RAL 2002 including flag pole
– seat made from red highly weather-resistant HPL panel (20 mm thickness)
– balcony parapet made from stainless steel tubes
– trough-shaped attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel. Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.

Foundations (on site)
2 pcs. 0,30 x 0,70 x 0,40 m
25 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,75 x 0,40 m
concrete amount: 1,89 m³

Approximate assembly values
2 mechanics 15 hours each
(without creating foundations)

Free height of fall
0,90 m

Appropriate for
children from the age of 2 years up,
public playgrounds etc.,
physical activity