Hill slide (4,00) with starting platform 0,20

Age group ? The specific age group for which the product was developed.

3+
Number of users ? The number of individuals who can use the product simultaneously.

7
Area of use ? The different environments or situations in which the product can be used.

public playgrounds
Product groups ? The categories of similar products.

Hill Slide Combinations

Technical specifications

Lifting device ? Appropriate hoisting equipment is necessary for assembling the playground equipment.

✓

Total length ? The measurement indicating the length of the playground equipment.

9,70 m

Total width ? The measurement indicating the width of the playground equipment.

1,50 m

Total height ? The measurement indicating the height of the playground equipment.

4,95 m

Minimum space length ? The minimum required length for the space where the playground equipment will be placed.

13,20 m

Minimum space width ? The minimum required width for the space where the playground equipment will be placed.

4,50 m

Minimum space height ? The minimum required height for the space where the playground equipment will be placed.

4,95 m

Number of installers ? The number of qualified individuals required for product assembly.

2 Pers.

Assembly time ? The time required by qualified individuals to assemble the product.

2 h

Heaviest single piece ? The weight of the heaviest component of the product. This information is crucial for transportation and assembly.

225,00 kg

(Total) Weight ? The total weight of the product. This information is essential for transportation and assembly.

360,00 kg

Free height of fall ? The maximum free fall height of the product, from which the required impact-absorbing surfaces, impact area size, and fall protection requirements can be derived according to (DIN) EN 1176-1:2017.

1,50 m

Platform heights

0,20 m

Foundations

4 pcs.

0,40 x 0,40 x 0,40 m
Volume: 0,06 m3

3 pcs.

0,40 x 0,40 x 0,60 m
Volume: 0,10 m3

1 pc.

1,40 x 0,75 x 0,40 m
Volume: 0,42 m3

Classic

Variants finder

Classic

Selected variant:

Please indicate the following variant number when placing your order:

Make contact

This kaiser & kühne product enables:

Product downloads:

Technical data
Area: 1,46 x 9,66 m
Minimum space: 4,46 x 12,16 m
(with a free height of fall of max. 1,50 m)
Platform height: 0,20 m
Slide installation height: 0,20 m
Slide entrance height: 0,30 m
Slide installation height above slide run-out section level zero: 4,00 m
(for a height of the hill of 3,80 m)
Slide inclination: 30°
Slide width: 0,60 m
Sliding sheet metal thickness: 2,5 mm

Posts
Posts made from stainless steel tubes Ø 120 x 3 mm covered by non-detachable protective stainless steel caps.
Upper ends of posts level with platforms are covered by welded-on circular blanks made from stainless steel.

Platform
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Hill slide
Sliding segments made of stainless steel, welded to a two-part slide for transport reasons, including flange connection at the point of separation for easy assembly by screwing on site.Stainless steel support post for the curved sections.
Course: curved section to the left 27°, curved section to the right 54°, curved section to the left 27°

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof screw connections thanks to screws with security socket.

Foundations (on site)
4 pcs. 0,40 x 0,40 x 0,40 m
3 pcs. 0,40 x 0,40 x 0,60 m
1 pc. 1,40 x 0,75 x 0,40 m

Approximate assembly values
2 mechanics 2 hours each
(without creating foundations)

Free height of fall
Platform: 0,20 m
Slide: Depending on the site profile, the free fall height and the size of the impact area result from the vertical distance between the bottom of the chute and ground level. The surfacing material for the impact area within the sliding section must meet the requirements given in table 4 (see EN 1176-1). The shock-absorbing characteristics of any other material to be chosen must be certified in accordance with EN 1177. The surface around the run-out section shall have a critical fall height of at least 1000 mm and shall be provided to at least 2000 mm beyond the run-out section (acc. to EN 1176-3).

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity

Hill Slide Combinations