Hill Slide Combinations

Technical data
Area: 3,75 x 7,20 m
Minimum space: 7,00 x 10,45 m
Platform height: 0,20 m
Slide installation height: 0,20 m
Slide entrance height: 0,30 m
Slide installation height above slide run-out section level zero: 3,00 m
(for a height of the hill of 2,80 m)
Slide inclination: 30°
Slide width: 0,60 m
Sliding sheet metal thickness: 2,5 mm

Posts
Posts made from stainless steel tubes Ø 12 cm covered by non-detachable protective stainless steel caps. Posts flush with platform level are made from stainless steel, covered by welded round plates.

Platform
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Hill slide
– attachment slide, width 0,60 m, one-piece welded assembly, stainless steel sheet thickness: 2,5 mm, with roll-off prevention above the entrance section
– additional stainless steel support post beneath curved section, sliding course 45° to the right

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with security socket.

Foundations (on site)
4 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,40 x 0,60 m
1 pc. 1,40 x 0,75 x 0,40 m
concrete amount: 0,62 m³

Approximate assembly values
2 mechanics 2 hours each
(without creating foundations)

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity