Dalben Towers

K&K Dalben tower combination consisting of:
Dalben tower (9,50) with helical tunnel slide 30°/38° (5,00 m) and wide attachment slide (2,00 m);
green tower hood / colour similar to RAL6029, with corrugated rubber flag

Technical data
Area: 7,00 x 8,00 m
Minimum space: 10,50 x 11,50 m (68 m²)
Height: 9,50 m + top element
Platform heights: 1,00 / 2,00 / 3,00 / 4,00 / 5,00 m

Posts
Steel, Ø 193,7 x 4 mm, hot-dip galvanised

Platforms
Triangular stainless steel platforms, welded construction with lug pattern, glass bead blasted, screw-fitted flange fixing to posts. Stainless steel ladder access from platform to platform (safety barrier included), height of the first rung: 0,50 m

Protective barriers (upwards from platform height 1,00 m)
Welded structure made of stainless steel tubes Ø 21/33,7 mm, glass bead blasted, screw-fitted flange fixing to posts

Tower hood
High pressure laminate 15 mm, green / similar to RAL 6029

Top element
Corrugated rubber flag with flag pole

K&K Wide attachment slide
Slide installation height: 2,00 m
Slide entrance height: 2,10 m
Slide inclination: 36°
Slide width: 1,10 m
Sliding sheet metal thickness: 2,5 mm

Attachment slide, width 1,10 m, one-piece welded assembly, with roll-off prevention above the entrance section, of low noise level thanks to trough-shaping

K&K Helical tunnel slide 30°/38°
Slide installation height: 5,00 m
Slide entrance height: 5,10 m
Slide inclination: 30°/38°
Sliding course: clockwise at an angle of 360°
Cross section of tunnel: Ø 0,80 m
Sliding sheet metal thickness: 2,5 mm

Sliding sections from stainless steel, of low noise level thanks to tunnel shape. Due to transport-related reasons, the slide is (in three parts) welded to a centre pylon including appropriate connecting flanges to facilitate installation on site.

– 16100 K&K Tunnel slide entrance section (30°)
– 16110035 K&K Straight section for 30° tunnel slide, length 0,35 m
– 16140 K&K Waved section for tunnel slides 30°/38°
– 16155 K&K 18 pcs. of helical tunnel slide sections, clockwise course at an angle of 360°
– 16148050 K&K half a waved section for tunnel slides 38°/30°
– 16180001 K&K Shortened tunnel slide run-out section 30°

including K&K Tunnel slide support post from tubular stainless steel Ø 120 x 3 mm, stainless steel fastening flange

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Anchorage
Dowelling of each base plate by means of 2 stainless steel injection anchors, material specification A4.
As damage protection, the tower is equipped with a lightning conductor.

Foundations (on site)
4 pcs. 1,00 x 1,00 x 0,50 m
3 pcs. 1,00 x 0,40 x 0,40 m
1 pc. 0,80 x 0,80 x 1,00 m
1 pc. 0,90 x 1,25 x 0,40 m
concrete amount: 3,30 m³

Approximate assembly values
2 mechanics 20 hours each plus lifting gear
(without creating foundations)

Free height of fall
2,10 m

Appropriate for
children from the age of 8 years up,
public playgrounds etc.,
physical activity

The foundation sizes indicated in this quotation correspond to static requirements for soils with moderate solubility with an admissible footing pressure of at least ?R,d = 150 kN/m² for towers with four posts.
With a deviating soil characteristic or with installation in areas with a high wind load (differing from wind zone 2 in Germany, equates to vref = 25,0 m/s) or with a high snow load (differing from snow load zone 2 in Germany, equates to sk ?0,85 kN/m²), technical modifications of the product construction might become necessary (for instance the addition of cross bracings). Thereby, additional costs and the extension of the delivery time will arise.
Upon request of the customer, Kaiser & Kühne can engage a recognised engineering office to establish the necessary static calculation. The customer must bear the costs arising hereby. Any necessary evidence of the local conditions must be provided by the customer.