Actio

Technical data
Space occupied by equipment: 4,95 x 4,48 x 5,35 m
Minimum space: 8,84 x 8,30 x 5,35 m
Impact area: 55 m²
Total height: 5,35 m
Free height of fall: 2,86 m
Weight: 115 kg heaviest single piece
735 kg as a whole

Arc 90°
– bent tube from hot-dip galvanised steel, Ø 114 x 3,6 mm (powder coating on choice)
– sphere from aluminium, Ø 250 mm (powder coating on choice)

Crow’s Nest
– timber balustrade made from planks, front face 1: 125 x 30 x 812 mm, front face 2: 92 x 30 mm. Differing front faces due to conical design
– platform made from planks, 30 mm thickness with middle square-shaped joist 125 x 30 x 980. Platform fastening on a ring-shaped flange.
Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly
– stainless steel construction from a ring at the bottom (Ø 60 x 3 x Ø 1200 welded to a ring-shaped flange, 15 x connector link for timber balustrade and 3 x holding fixtures); a ring at the top (Ø 38 x 2 x Ø 1500 welded to 15 x holding fixtures for balustrade planks). Linking elements: 6 x tube (Ø 38 x 2)

Actio Roof
– roof panels from highly weather-resistant coloured HPL, 13 mm
– roof hood from stainless sheet steel, 3 mm
– attachment by means of 3 stainless steel tubes (Ø 60,3 x 2,5) with fastening brackets

Monkey Climber
– combination of rings made from stainless steel tubes Ø 38 mm
– 7 mm stainless steel chain suspension and connection and universal joint
– top: screw-type connection to Actio structural element
bottom: embedding in cast-in-place concrete

Spring Slide
– welded construction from stainless steel tubes Ø 42,4 mm
– top: screw-type connection to Actio structural element
– bottom: embedding in cast-in-place concrete

Climbing Wall
– climbing wall made from a coloured highly weather-resistant HPL panel (20 mm thickness), with free climbing elements fitted to both sides
– top: screw-type connection to Actio structural element by means of an aluminium clamp (powder coating on choice, according to RAL colour chart) and a welded construction from stainless steel tubes Ø 38
– bottom: embedding in cast-in-place concrete

Climbing Pipe
– welded construction from a stainless steel tube Ø 38 mm with three stainless steel balls Ø 150 mm
– top: screw-type connection to Actio structural element
– bottom: embedding in cast-in-place concrete

Bow Ladder
– welded, helical construction from stainless steel tubes Ø 38 mm
– bow-shaped, skewed ladder
– top: screw-type connection to Actio structural element by means of aluminium clamps (powder coating on choice, according to RAL colour chart)
– bottom: embedding in cast-in-place concrete

Actio panel
– coloured highly weather-resistant coloured HPL panel (20 mm thickness) including labelling “Actio”
– connection by means of clamps from aluminium (powder coating on choice, according to RAL colour chart)

Foundations (on site)
3 pcs. 1,30 x 0,50 x 0,50 m
4 pcs. 0,60 x 0,60 x 0,50 m
2 pcs. 0,80 x 0,40 x 0,50 m
concrete amount: approx. 2 m³

Approximate assembly values
3 mechanics 5 hours each
(without creating foundations)

Appropriate for
children from the age of 6 years up,
public playgrounds etc.,
physical activity