Tunnel Slides

Technical data
Area: 4,41 x 10,23 m
Minimum space: 7,44 x 13,08 m
Platform height: 1,40 up to 2,40 m
Slide installation height: 2,40 m
Slide entrance height: 2,50 m
Slide installation height above run-out section level zero: 3,90 m
(for a hill height of 1,50 m)
Slide inclination: 30°
Sliding width: 0,60/0,80 m
Sliding sheet metal thickness: 2,5 mm

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps.
Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrail from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– infill barrier from stainless steel tubes, Ø 33,7 x 2 / 25 x 2 mm, one-piece welded assembly
– climbing rung made from stainless steel tubes Ø 33,7 x 2 mm
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– tent roof, 45° inclination, from highly weather-resistant HPL panels, 13 mm thickness. Fastening to stainless steel frame Ø 33,7 x 2 mm
– trapezoid pent roof, 30° inclination, from highly weather-resistant coloured HPL, 13 mm thickness, fastening to a frame from stainless steel tubes Ø 33,7 x 2 mm

Tunnel hill slide
sliding sections from stainless steel, of low noise level thanks to tunnel shape, welded to a two-part slide for transport reasons, including appropriate connecting flanges to facilitate installation on site
Course: curved at 54° to the right

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof screw connections thanks to screws with protective screw cap.

Foundations (on site)
9 pcs. 0,40 x 0,40 x 0,40 m
1 pc. 0,40 x 0,40 x 0,60 m
1 pc. 1,40 x 0,75 x 0,40 m

Free height of fall
Platform: 1,40 m
Slide: Depending on the site profile, the free fall height and the size of the impact area result from the vertical distance between the bottom of the chute and ground level. The surfacing material for the impact area within the sliding section must meet the requirements given in table 4 (see EN 1176-1). The shock-absorbing characteristics of any other material to be chosen must be certified in accordance with EN 1177. The surface around the run-out section shall have a critical fall height of at least 1000 mm and shall be provided to at least 2000 mm beyond the run-out section (acc. to EN 1176-3).

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity