Play Structures

Technical data
Total height: 6,87 m
Area: 15,89 x 1,73 x 6,87 m
Minimum space: 19,36 x 4,85 x 6,87 m
Free height of fall: 2,40 m
Impact area: 74 m²
Platform heights: 1,80/2,00/2,20/2,40/2,60 m
Slide installation height: 2,00 m
Slide entrance height: 2,10 m
Slide inclination: 36°
Slide width: 0,60 m
Thickness of sliding sheet metal: 2,5 mm
Weight: 106 kg heaviest single component
2167 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps. Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platforms
Platforms from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.

Attachment parts
– bowed guardrail with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– timber infill barrier from Robinia, 125 x 30 mm, fastening between stainless steel tubes Ø 33,7 x 2 mm
– infill panel from highly weather-resistant coloured HPL, fastening between stainless steel tubes Ø 33,7 x 2 mm
– climbing wall with six cut-outs from highly weather-resistant coloured HPL, 20 mm thickness, framed by stainless steel tubes
– (cranked) ladder rung made from stainless steel tubes Ø 33,7 mm
– single-sided free climbing wall (0,80) from highly weather-resistant coloured HPL, 20 mm, framed by tubular stainless steel
– vertical handle from stainless steel tube Ø 33,7 x 2 mm, as a climbing aid
– climbing net made from Hercules ropes, framed by tubular stainless steel
. bench seat 0,80 m; from highly weather-resistant coloured HPL
– spatial tunnel-shaped net made from Hercules ropes, mesh size all around 125×125 mm, framed by stainless steel
– attachment slide, width 0,60 m, with roll-off prevention above the entrance section, one-piece welded assembly, with additional support beneath run-out section. Slide of low noise level thanks to trough-shaping.
– tower-shaped roof 72° from highly weather-resistant coloured HPL, 13 mm
– revolving tower flag with K&K logo

For your planning, due to a possible sliding surface heating, please see to a north-east orientation of the slides or provide half-shade of trees.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof connections thanks to screws with protective screw caps.

Foundations (on site)
18 pcs. 0,40 x 0,40 x 0,60 m
2 pcs. 1,60 x 0,40 x 0,80 m
1 pc. 0,75 x 0,40 x 0,40 m
concrete amount: 2,9 m³

Approximate assembly values
3 mechanics 22 hours each
(without creating foundations)

Appropriate for
children from the age of 5 years up,
public playgrounds etc.,
physical activity