Actio

Technical data
Space occupied by equipment: 4,89 x 4,47 x 2,93 m
Minimum space: 8,30 x 8,29 x 2,93 m
Impact area:50 m²
Total height: 2,93 m
Free height of fall: 2,86 m
Weight: 115 kg heaviest single component
550 kg as a whole

Arc 90°
– bent tube from hot-dip galvanised steel, Ø 114 x 3,6 mm (powder coating on choice)
– sphere from aluminium, Ø 250 mm (powder coating on choice)

Crow’s Nest
– timber balustrade made from planks, front face 1: 125 x 30 x 812 mm, front face 2: 92 x 30 mm. Differing front faces due to conical design
– platform made from planks, 30 mm thickness with middle square-shaped joist 125 x 30 x 980. Platform fastening on a ring-shaped flange.
Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly
– stainless steel construction from a ring at the bottom (Ø 60 x 3 x Ø 1200 welded to a ring-shaped flange, 15 x connector link for timber balustrade and 3 x holding fixtures); a ring at the top (Ø 38 x 2 x Ø 1500 welded to 15 x holding fixtures for balustrade planks). Linking elements: 6 x tube (Ø 38 x 2)

Monkey Climber
– combination of rings made from stainless steel tubes Ø 38 mm
– 7 mm stainless steel chain suspension and connection and universal joint
– top: screw-type connection to Actio structural element
bottom: embedding in cast-in-place concrete

Bow Ladder
– welded, helical construction from stainless steel tubes Ø 38 mm
– bow-shaped, planar ladder
– top: screw-type connection to Actio structural element by means of aluminium clamps (powder coating on choice, according to RAL colour chart)
– bottom: embedding in cast-in-place concrete

Chill Wall
– climbing wall made from a coloured highly weather-resistant HPL panel, 20 mm thickness
– top: screw-type connection to Actio structural element by means of an aluminium clamp (powder coating on choice, according to RAL colour chart) and a welded construction from stainless steel tubes Ø 38
– bottom: embedding in cast-in-place concrete

Climbing Pipe
– welded construction from a stainless steel tube Ø 38 mm with three stainless steel balls Ø 150 mm
– top: screw-type connection to Actio structural element
– bottom: embedding in cast-in-place concrete

Resting Point
– climbing wall made from a coloured highly weather-resistant HPL panel, 20 mm thickness, with free climbing elements fitted to one side, framed in a tubular stainless steel construction Ø 38
– top: screw-type connection to Actio structural element
– bottom: embedding in cast-in-place concrete

Actio panel
– coloured highly weather-resistant coloured HPL panel, 20 mm thickness including labelling “Actio”
– connection by means of clamps from aluminium (powder coating on choice, according to RAL colour chart)

Foundations (on site)
1 pc. 1,77 x 0,5 x 0,5 m
2 pcs. 1,3 x 0,5 x 0,5 m
4 pcs. 0,6 x 0,6 x 0,5 m
2 pcs. 0,8 x 0,4 x 0,5 m
concrete amount: 2 m³

Approximate assembly values
3 mechanics 5 hours each
(without creating foundations)

Appropriate for
children from the age of 6 years up,
public playgrounds etc.,
physical activity