Water Play Structures

Technical data
Area: 4,95 x 6,30 m
Minimum space: 7,95 x 9,30 m (59 m²)
Total height: 1,60 m
Platform height: 0,40 m
Weight: 85 kg heaviest single component
700 kg as a whole

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. With the exception of posts level with platforms, end-grain surfaces are covered by non-detachable protective stainless steel.
Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platform
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly.
The platform is additionally covered by profiled stainless sheet steel.

Attachment parts
– stepped handrail from stainless steel tube Ø 33,7 x 2 mm

Water pump item no. 0-33130-001
Suction pipe connection 1 ¼ in (pipe diameter at least ¾ in), welded stainless steel construction, fully encapsulated pump housing, pump mechanism with roller and anti-friction bearing. During winter season, a removal of the upper housing and the handle is indispensable, (winter) cover panel for the bottom part is included with delivery.

Please note:
The installation of the water pump to a pressure water pipe requires a K&K Valve combination (item no. 0-33190-000 or 0-33195-000).
If the water supply to the pump (through a clock timer or similar) is interrupted, the pump handle must be safeguarded against operation (for example by the K&K pump latch, item no. 1040639). This prevents a handle setback due to an increasing negative pressure.
Please also consider the basic technical details given in the installation instructions (such as spacing, pipe diameters etc.); upon request, you will receive them directly from K&K or by downloading the corresponding PDF from www.kaiser-kuehne.com.

Distributing table (0,50) item no. 0-33480-000
Welded structure made of stainless steel with 2 water outlets. Conical stopper made of rubber with fixing device for total removal of water. Thickness of sheet steel: at least 2 mm/pipe Ø 38 mm.

Water trough type S1 (1,60)
Welded stainless steel construction. Inclined run-off. Sheet metal thickness: min. 2 mm
Additional trough support for inclined installation corresponding to water feed or water run-off.

Water basin (0,50) item no. 0-33431-000
Base area: 0,84 x 1,00 m
Total height: 0,65 m
Weight: 55 kg as a whole
Welded stainless steel construction with one discharge drilling. Sheet metal thickness: 2 mm at least / tube Ø 38 mm. Anchorage by means of ring-shaped bottom flange. At extra charge, there are appropriate ring-shaped concrete foundations (015165) for flange fastening and concrete form blocks (015170) for masonry works to compensate different levels or for a safe installation with loose fall protection surfacing (sand, gravel etc.)

Water trough 0,80 m
Welded stainless steel construction. Sheet metal thickness: 2 mm at least. Inclined run-off.
Additional trough support for inclined installation corresponding to water feed or water run-off.

Mixing plate (0,25) 2 pcs. of item no. 0-33450-000
Welded structure made of stainless steel with six water outlets. Sheet metal thickness: min. 2 mm/ tube Ø 38 mm. Anchorage by means of ring-shaped bottom flange. At extra charge, there are appropriate ring-shaped concrete foundations (015165) for flange fastening and concrete form blocks (015170) for masonry works to compensate different levels or for a safe installation with loose fall protection surfacing (sand, gravel etc.)

Water trough type S1 2,40 m
Welded stainless steel construction. Inclined run-off. Sheet metal thickness: 2 mm at least / tube Ø 38 mm.
Additional trough support for inclined installation corresponding to water feed or water run-off.

Water scales item no. 0-33495-000
Base area: 0,45 x 2,05 m
Weight: 55 kg as a whole
Total height: approx. 1,05 m
Welded structure made of stainless steel with adjustable, shock absorbing tilt-mechanism to distribute the waterflow in opposite directions.
Sheet metal thickness: 2,5 mm/tube Ø 20 mm and Ø 38 mm.

Water table (0,25) item no. 0-33445-000
Base area: 0,84 x 1,84 m
Total height: 0,40 m
Weight: 85 kg as a whole
Welded stainless steel construction with one tubular run-off and four storage surfaces. Conical rubber closing with locking mechanism. Sheet metal thickness: 2 mm at least / tube Ø 38 mm. Anchorage by means of ring-shaped bottom flanges.
At extra charge, there are appropriate ring-shaped concrete foundations (015165) for flange fastening and concrete form blocks (015170) for masonry works to compensate different levels or for a safe installation with loose fall protection surfacing (sand, gravel etc.)

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof screw connections thanks to protective screw caps.

Foundations (on site)
5 pcs. 0,40 x 0,40 x 0,40 m
2 pcs. 0,50 x 0,50 x 0,40 m
6 pcs. 0,50 x 0,50 x 0,50 m
concrete amount: 1,27 m³

Approximate assembly values
2 mechanics 3 hours each
(without creating foundations, without water supply connection)

Free height of fall
0,90 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
manual activity