Water Play Structures

Technical data
Total height: approx. 2,00 m
Area: approx. 3,85 x 4,35 m
Minimum space: approx. 6,85 x 7,35 m (39 m²)
Platform height: 0,80 m

Posts
Laminated Robinia timber Ø 120 mm with cylindrical milling. End-grain surfaces are covered by non-detachable protective stainless steel caps.
Stainless steel tubular pedestal for concrete-cast foundation and for fixed mounting to round Robinia posts, Ø 120 mm, below playing surface.

Platform
Platform from boards of 30 mm thickness and all-round square-shaped joists 45 x 100 mm. Dried timber from Robinia, planed, milled and free from decay. Force-fitting fastening through specific stainless steel brackets with end-to-end bolt assembly. The pump platform is additionally covered by profiled stainless steel sheet.

Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation. Thanks to a specific fastening adaptor, forces arising from the modular attachment parts are directly derived into the posts. Tamper-proof screw connections thanks to protective screw caps.

Attachment parts
– bowed guardrails with roll-off prevention, from stainless steel tubes, Ø 33,7 x 2 mm
– tandem guardrails 0,80 m/ from stainless steel tubes , Ø 33,7 x 2 mm
– ladder rungs from stainless steel tubes Ø 38 x 2 mm

K&K Water pump item no. 0-33130-001
Suction pipe connection 1 ¼ in (pipe diameter at least ¾ in), welded stainless steel construction, fully encapsulated pump housing, pump mechanism with roller and anti-friction bearing. During winter season, a removal of the upper housing and the handle is indispensable, (winter) cover panel for the bottom part is included with delivery.

Please note:
The installation of the water pump to a pressure water pipe requires a K&K Valve combination (item no. 0-33190-000 or 0-33195-000).
If the water supply to the pump (through a clock timer or similar) is interrupted, the pump handle must be safeguarded against operation (for example by the K&K pump latch, item no. 1040639). This prevents a handle setback due to an increasing negative pressure.
Please also consider the basic technical details given in the installation instructions (such as spacing, pipe diameters etc.); upon request, you will receive them directly from K&K or by downloading the corresponding PDF from www.kaiser-kuehne-play.com.

K&K Water storage basin
Base area: Ø 0,68 m
Welded stainless steel construction with two tubular run-offs. Conical rubber closing with locking mechanism for complete water extraction. Sheet metal thickness: 2 mm at least / tube Ø 33,7 mm.

K&K Y-shaped water trough
Welded stainless steel construction with one water feed and two run-offs, sheet metal thickness: 2 mm at least / tube Ø 38 mm. Including flexible flap (2 pcs.) with stainless steel knob and reinforced rubber blade, clamping device for tube attachment Ø 38 mm

K&K Water swirl table 0,80 m x 1,60m
Welded stainless steel construction with 5 adjustable triangular HPL plates for water flow obstruction. Sheet metal thickness: 2 mm at least , tube Ø 33,7 mm resp. Ø 30 mm

K&K Maxi water table 6 x 0,80 m with discharge lock
Base area: 1,40 x 1,70 m
Height: 0,80 m
Hexagonal stainless steel construction with conical rubber closing for water damming, regulation or redirection. Sheet metal thickness: 2 mm at least.

Metal components: stainless steel
Robinia timber is furnished with water-repellent, breathable protective coating. Besides protection from moisture, that treatment reduces crack formation.

Foundations (on site)
16 pcs. 0,40 x 0,40 x 0,40 m
concrete amount: 1 m³

Approximate assembly values
2 mechanics 3 hours each
(without creating foundations, without water supply connection)

Free height of fall
1,15 m

Appropriate for
children from the age of 4 years up,
public playgrounds etc.,
manual activity